Sökresultat för "materials science"

Junior forskningsingenjör inom det materialvetenskapliga området Är du precis klar med dina studier och vill bidra till en säkrare värld med dina praktiska och teoretiska kunskaper om material? Är du intresserad av att lära dig mer och utvecklas inom tillverkning, analys och provning strukturella material såsom metaller och keramer? Då kan FOI vara din nya arbetsplats! Vi erbjuder ett arbetsliv i balans, en utvecklande arbetsmiljö och ett samhällsviktigt arbete! Om tjänsten Som forskningsingenjör vid FOI Grindsjön kommer du bidra till ökad kompetens och förmåga inom karakterisering av metall och kerambaserade material. Din huvudsakliga arbetsuppgift är att bidra till processutvecklingen för materialkarakterisering av prover tillverkade av framför allt additiv tillverkning och dynamisk konsolidering. Detta uppnås genom införskaffande av kunskap om lämplig provberedning samt analysmetod och därefter även själva utförandet. Resultatet av ditt arbete dokumenteras skriftligen efter projektens behov. Arbetet utförs i tätt samarbete med övriga i materialforskningsgruppen och kräver förutom teknisk kompetens även en vilja att samarbeta. Om enheten Du kommer att ingå i enheten Anläggningsskydd och material som tillhör avdelningen vapen, skydd och säkerhet. Enheten består idag av en unik kombination av analytiker, experimentalister och disputerade forskare som gör att vi har förmågan att kombinera teoretisk och tillämpad forskning för framtiden men även kan svara på våra uppdragsgivares frågor här och nu! Läs gärna mer om vad vi gör: Vapen, skydd och säkerhet. Natursköna Grindsjön ligger på Södertörn, ca 4 mil söder om Stockholm. SL-bussförbindelser finns med Tumba, Västerhaninge och Ösmo/Nynäshamn. Har du den kompetensprofil vi behöver? Krav Blivande civilingenjör, master eller motsvarande som arbetsgivaren bedömer som likvärdigt Förstår, talar och skriver svenska obehindrat Förstår, talar och skriver engelska på professionell nivå Vi söker dig som trivs att arbeta tillsammans med andra människor och tar initiativ till att få saker gjorda. Vi ser gärna att du kommer med egna idéer till lösningar på problem och har ett nytänkande som kan omsättas i praktiken. Meriterande Körkort B Erfarenhet från arbete i laboratoriemiljö eller på försöksanläggning Erfarenhet från additiv tillverkning av metalliska eller keramiska material. Erfarenhet från metallografi Erfarenhet från programmering i Python. Vad erbjuder vi dig? Totalförsvarets forskningsinstitut (FOI) är en statlig myndighet som bedriver världsledande forskning inom försvar och säkerhet till stöd för Sveriges militära och civila försvar. Vi erbjuder en unik arbetsplats där du får möjlighet att arbeta med det som är viktigt för totalförsvaret och hela samhället. Forskningen tillämpas både inom försvarsmyndigheter och hos civila aktörer och spelar en avgörande roll i att bygga en relevant och effektiv försvarsförmåga. Vi arbetar medvetet för en god arbetsmiljö med en bra balans mellan arbete och privatliv. Utöver detta erbjuder vi en rad förmåner. Läs mer om hur det är att jobba hos oss: https://www.foi.se/jobba-hos-oss.html Tjänsten är en tillsvidareanställning som kan komma att inledas med sex månaders provanställning. Vill du vara med och söka svaren för en säkrare värld? Välkommen med din ansökan i form av CV och personligt brev via ansökningsknappen senast den 23 augusti! För mer information om tjänsten är du välkommen att kontakta enhetschef Magnus Isberg. Fackliga företrädare är Filip Gökstorp (Saco-S) och Magnus Lindström (OFR/S – ST vid FOI) Samtliga nås på 08-555 030 00. Då anställningen är placerad i säkerhetsklass krävs svenskt medborgarskap. Säkerhetsprövning med registerkontroll kommer att genomföras före anställning enligt säkerhetsskyddslagen (2018:585). Inför säkerhetsprövning efterfrågas vidimerade kopior på de utbildningar och tjänstgöringsintyg som är relevanta för tjänsten. FOI är en myndighet varmed inlämnade ansökningshandlingar blir allmän handling som på begäran kan lämnas ut till utomstående enligt offentlighets- och sekretesslagen. Erbjudanden från rekryteringsföretag undanbedes.

Vill du vara med och forma framtidens separationsteknik? Gå med i det prestigefyllda ERC-finansierade projektet DynanoNet och bidra till utvecklingen av digitalt styrda separationsteknologier baserade på elektroniskt reglerbara membran. Vi ser fram emot din ansökan. Om avdelningen/gruppen Du kommer att tillhöra Institutionen för fiber- och polymerteknologi (FPT), Sveriges ledande akademiska miljö för forskning och utbildning inom polymerer, fibrer, cellulosabaserade material och hållbara teknologier. FPT kombinerar grundläggande vetenskap med samhällsnytta genom nära samarbeten med industri och forskningspartners. Som en del av avdelningen Fiberprocesser och teknologi kommer du att arbeta i ett ambitiöst och tvärvetenskapligt team som utvecklar en ny klass av elektroniskt reglerbara cellulosabaserade membran som möjliggör adaptiva och digitalt styrda separationsprocesser. Forskningen leds av biträdande universitetslektor Tobias Benselfelt och fokuserar på nanofibrillbaserade material, elektrokemiskt styrda membran och digitaliserade separationsprocesser. Mer information om Tobias Benselfelt finns på: https://www.kth.se/profile/bense Arbetsuppgifter Anställningen omfattar forskning inom DynanoNet-projektet, inklusive: Att bedriva självständig forskning inom projektets område. Att koordinera experimentellt arbete i samarbete med en doktorand. Att presentera forskningsresultat vid projektmöten, workshops och internationella konferenser. Att dokumentera och rapportera projektets aktiviteter och framsteg. Den framgångsrika kandidaten kan även komma att bidra till handledning och mentorskap av doktorander och mastersstudenter. Kvalifikationer Krav Avlagd doktorsexamen inom materialvetenskap, kemiteknik, polymervetenskap, elektrokemi, membranvetenskap eller annat för projektet relevant område. Detta behörighetskrav ska vara uppfyllt senast vid tidpunkten då anställningsbeslutet fattas. Mycket god förmåga att kommunicera på engelska i tal och skrift. Mycket goda kunskaper i engelska är nödvändiga för effektiv kommunikation i en internationell forskningsmiljö. God förmåga att skriva vetenskapliga texter samt att presentera och kommunicera forskningsresultat. Personliga egenskaper För att lyckas i rollen behöver du vara ansvarstagande, självständig, motiverad, nyfiken och strukturerad. Du har god samarbetsförmåga och trivs med att arbeta i tvärvetenskapliga forskningsmiljöer.  Meriterande Vid sista ansökningsdag högst tre år sedan doktorsexamen eller en utländsk examen som bedöms motsvara doktorsexamen avlades. Forskningserfarenhet inom ett eller flera av följande områden: membranvetenskap, elektrokemi, transportfenomen, nanofibrillära material, cellulosananofibriller, hydrogeler eller filtreringsteknik. Erfarenhet av elektrokemiska karakteriseringstekniker, inklusive impedansspektroskopi, cyklisk voltammetri och/eller chronoamperometri. Erfarenhet av att designa och bygga experimentella uppställningar eller forskningsutrustning. En stark vetenskaplig publikationslista som visar forskningsmässig självständighet. Dokumenterad kreativitet, innovationsförmåga och förmåga att utveckla nya forskningsidéer. Medvetenhet om mångfalds- och likabehandlingsfrågor med särskilt fokus på jämställdhet. Vi kommer att lägga stor vikt vid personliga egenskaper och vetenskaplig självständighet, problemlösningsförmåga, initiativförmåga samt förmågan att arbeta effektivt i en tvärvetenskaplig och samarbetsinriktad forskningsmiljö. Bli en del av KTH   KTH formar framtiden genom utbildning, forskning och innovation. Som ett ledande internationellt tekniskt universitet spelar vi en aktiv roll i att driva och medverka i omställningen till ett hållbart samhälle. Här erbjuds du möjligheten att växa och utvecklas på en kreativ och dynamisk arbetsplats med goda arbetsvillkor och förmåner. Jämställdhet, mångfald och lika villkor är en kvalitetsfråga och en självklar del av KTH:s värdegrund som universitet och statlig myndighet. Läs mer om våra förmåner och hur det är att arbeta och utvecklas på KTH. Fackliga representanter Kontaktuppgifter till fackliga representanter. Ansökan Du ansöker via KTH:s rekryteringssystem. Du som sökande har huvudansvaret för att din ansökan är komplett när den skickas in. Ansökan ska innehålla:  CV inklusive relevant yrkeserfarenhet och kunskap. En länk till din Google Scholar-profil eller en motsvarande sida är viktig. Kopia av examensbevis och betyg från dina tidigare universitetsstudier. Översättningar till engelska eller svenska om de ursprungliga dokumenten inte utfärdas på något av dessa språk. Kortfattad redogörelse för varför du vill bedriva forskning, dina akademiska intressen och hur de relaterar till dina tidigare studier och framtida mål. max 1 sida lång. Bifoga två publikationer som visar din kompetens inom det aktuella forskningsområdet.  Ansökan ska vara KTH tillhanda senast sista ansökningsdagen vid midnatt, CET/CEST (Central European Time/Central European Summer Time). Om anställningen Anställningen gäller tillsvidare, dock längst tre år En anställning som postdoktor är en tidsbegränsad meriteringsanställning med huvudinriktning mot forskning avsedd som ett första karriärsteg efter disputation. Övrigt För information om behandling av personuppgifter i samband med rekrytering. Det kan förekomma att en anställning hos KTH är placerad i säkerhetsklass. Om så är fallet för just denna anställning görs en säkerhetsprövning av sökande i enlighet med säkerhetsskyddslagen (2018:585) efter samtycke. I dessa fall är en förutsättning för anställning att sökande blir godkänd efter säkerhetsprövning. Vi undanber oss direktkontakt med bemannings- och rekryteringsföretag samt försäljare av platsannonser.

Do you want to explore the application of 2D materials in the energy storage field? This is an exciting opportunity for a postdoctoral position at the Division of Materials and Manufacture, Department of Mechanical Engineering, focused on innovative research in the development of functionalized two-dimensional materials and their composites for lithium-ion battery and future battery.  About us  At the department of https://www.chalmers.se/en/departments/me/ we unite the power of technology, people, and society to drive the transition toward a sustainable future. Through research, education, and collaboration, we create solutions that connect materials to mobility, ideas to impact – shaping a resilient and sustainable world. In the division of https://www.chalmers.se/en/departments/me/research/materials-and-manufacture/ you will join a friendly, international team passionate about shaping the future of materials and production. Our research spans innovative materials, advanced manufacturing, and sustainable solutions – always with real-world impact in mind, and with strong ties to industry. If you are interested in working experimentally and making a difference in the areas of materials and manufacturing, we look forward to receiving your application.  About the research project   The aim of this project is to investigate the use of Graphene related two-dimensional (2D) materials to improve the performance and efficiency of lithium-ion batteries. 2D materials such as graphene, MXenes, and transition metal dichalcogenides possess high electrical conductivity, large surface area, and excellent mechanical strength, which can enhance charge transport and energy storage capacity. These materials can help address major limitations of conventional lithium-ion batteries, including slow charging rates, low energy density, overheating, and poor cycle stability. The project also aims to explore the functionalization of 2D materials and understand how 2D materials can improve battery safety, extend lifespan, and support the development of lightweight and high-performance energy storage systems for future technologies. Who we are looking for  The following requirements are mandatory:  A doctoral degree in Materials Science, Polymer Chemistry, Physics, or an equivalent foreign degree. This eligibility requirement must be met no later than the time the employment decision is made   Strong written and verbal communication skills in English  Experience in the synthesis of 2D materials, surface modification of graphene, and using 2D materials for battery   Personal competences in accordance with the requirements profile including specification (e.g. social skills, meaning that you enjoy collaborating with others)  You are expected to be somewhat accustomed to teaching, and to demonstrate good potential within research and education.  The following experience will strengthen your application:  It is highly meritorious if the doctoral degree has been obtained within the last three years prior to the application deadline Experience in graphene, advanced characterization, and battery-related study, with good publication record What you will do  Synthesis of 2D materials and related composites Surface functionalization and modification of graphene and its related materials Understand the energy storage mechanism of 2D materials, and how it could improve the performance of battery Fabrication of batteries and evaluation of their performance. Supervise master’s and/or doctoral students to a certain extent  Possibility to engage in teaching at undergraduate/master’s level  The position is meritorious for future roles in academia, industry, or the public sector.  Contract terms   The position is a temporary full-time employment for two years with the possibility of a one-year extension.  The position requires physical presence throughout the entire employment. A valid residence permit must be presented by the start date, otherwise the offer may be withdrawn.  What we offer  As a postdoc at Chalmers, you are an employee and enjoy all employee benefits. Read more about  https://www.chalmers.se/en/about-chalmers/work-with-us/ and our https://www.chalmers.se/en/about-chalmers/work-with-us/chalmers-as-an-employer/benefits-and-conditions/  for employees.  A dynamic and inspiring working environment in the coastal city of https://www.goteborg.com/en.  Read more about Sweden’s generous parental leave, subsidized day care, free schools, healthcare etc at https://www.movetogothenburg.com/  Chalmers is dedicated to improving gender balance and actively works with equality projects, such as https://www.chalmers.se/en/about-chalmers/organisation-and-governance/equality/genie-gender-initiative-for-excellence/. We celebrate diversity and consider equality and inclusion as fundamental aspects of all our activities.  If Swedish is not your native language, Chalmers offers Swedish courses to help you settle in.  Application procedure  The application should be written in English be attached as PDF-files, as below. Maximum size for each file is 40 MB. Please note that the system does not support Zip files.  CV  A comprehensive CV, including a complete list of publications.  Details of previous teaching and pedagogical experience.  Personal letter  A brief introduction about yourself.  A summary of your previous research fields and key research outcomes.  An outline of your future goals and research focus.  Use the button at the foot of the page to reach the application form.       A background check may be conducted as part of the application process.     Please note: The applicant is responsible for ensuring that the application is complete. Incomplete applications and applications sent by email will not be considered. Contact details to references will be requested after the interview.    We welcome your application no later than 30th of August, 2026 For questions please contact:  Jinhua Sun    Associate Professor   Email: jinhua@chalmers.se   Phone number: 0769609956   We look forward to your application!  *** Chalmers declines to consider all offers of further announcement publishing or other types of support for the recruiting process in connection with this position. ***     Chalmers was founded in 1829 and has the same motto today as it did then: Avancez – forward.

Luleå University of Technology experiences rapid growth with world-leading expertise within several research areas. Our scientific and artistic research and education are conducted in close collaboration with international, national and regional companies, the public sector and leading universities. Luleå University of Technology has an annual turnover of just over SEK 2.3 billion. We have more than 1,800 employees and nearly 21,600 students. The Division of Materials Science at Luleå University of Technology invites highly motivated candidates interested in conducting research in Engineering Materials, with a focus on the design and structuring of advanced sorbent materials for environmental and gas-cleaning applications. The research subject "Engineering Materials" has ongoing research programs span broad research areas in metallic and ceramic materials (high-temperature intermetallic, space materials, high-strength steels, porous ceramic materials, and materials intended for energy recovery). The division is part of the Department of Engineering Science and Mathematics. The department has several other research topics with activities that border on material technology, such as materials mechanics and machine elements. In the undergraduate program, the main two programs focusing on the international profile of the Division of Materials Science are important for the department, namely the EEIGM master's engineering program and the AMASE master's program. Within these educations, many students perform project work and degree projects in projects related to our research. The research subject of Engineering Materials consists of five senior researchers, two technicians, and nine doctoral students.   SUBJECT DESCRIPTION Engineering materials includes the composition, structure, properties and production of materials, mainly metallic and ceramic materials, as well as aspects of their use.   PROJECT DESCRIPTION The PhD student will focus on the development of structured sorbent systems and additive manufacturing approaches for industrial NOx and SOx capture applications. The work will include formulation of printable sorbent inks and pastes with controlled rheological properties, integration of functional nanoparticles for induction-assisted regeneration, and fabrication of structured adsorbent geometries using advanced manufacturing techniques. The student will investigate how structural design, porosity, and mass-transfer properties influence adsorption performance, pressure drop, thermal management, and cyclic stability under humid process conditions. The project will further involve scale-up, process integration, and evaluation of structured sorbents in pilot-scale systems relevant to acid-plant and greenhouse CHP gas streams. The project is approved for funding in EIC Pathfinder challenges from waste to value creation.   TASKS Working as a researcher involves defining your daily tasks and how they will be carried out. You will act and train as a project manager, combined with your development. Involvement with other projects and teaching will occur up to 20 percent of your time.   QUALIFICATIONS Appropriate background for the position is a Master of Science degree in materials science, chemistry or chemical engineering, good knowledge, experience, on sorption and catalysts and their characterization and shaping of sorbents and catalysts. The candidate must be good at written and oral English. Experience in processing science, porous materials, and synthetic chemistry is advantageous.   INFORMATION Employment as a doctoral student is time-limited to 4 years, teaching and other department duties can add up to 20% of full-time. Place of employment is Luleå at the Department of Engineering Science and Mathematics, Division for Materials Science.   For further information please contact: Professor Farid Akhtar, +46 920-49 1793 mailto:farid.akhtar@ltu.se Professor Alberto Vomiero, +46 920-49 3139 mailto:alberto.vomiero@ltu.se   Union representatives: SACO-S Diana Chroneer, +46 920-49 2037 mailto:diana.chroneer@ltu.se OFR-S Marika Vesterberg, +46 920-49 1721 mailto:marika.vesterberg@ltu.se   Luleå University of Technology works actively with gender equality and diversity, contributing to a creative study and work environment. The university's values are based on respect, openness, cooperation, trust and responsibility.   APPLICATION We prefer that you apply for this position by clicking on the apply button below. The application should include a CV, personal letter and copies of verified diplomas from high school and universities. Mark your application with the reference number below. Your application, including diplomas, must be written in English or Swedish.   Application deadline: August 9, 2026 Reference number: 3887-2026

Luleå University of Technology experiences rapid growth with world-leading expertise within several research areas. Our scientific and artistic research and education are conducted in close collaboration with international, national and regional companies, the public sector and leading universities. Luleå University of Technology has an annual turnover of just over SEK 2.3 billion. We have more than 1,800 employees and nearly 21,600 students. The Division of Materials Science at Luleå University of Technology invites motivated candidates interested in conducting research in Engineering Materials, with a focus on the design and development of advanced sorbent materials for environmental and gas-cleaning applications. The research subject "Engineering Materials" has ongoing research programs span broad research areas in metallic and ceramic materials (high-temperature intermetallic, space materials, high-strength steels, porous ceramic materials, and materials intended for energy recovery). The division is part of the Department of Engineering Science and Mathematics. The department has several other research topics with activities that border on material technology, such as materials mechanics and machine elements. In the undergraduate program, the main two programs focusing on the international profile of the Division of Materials Science are important for the department, namely the EEIGM master's engineering program and the AMASE master's program. Within these educations, many students perform project work and degree projects in projects related to our research. The research subject of Engineering Materials consists of seven senior researchers, two technicians, and eleven doctoral students.   SUBJECT DESCRIPTION Engineering materials includes the field of material composition, structure, properties and production of materials – mainly metallic and ceramic – as well as application aspects.   PROJECT DESCRIPTION The PhD student will focus on the synthesis, optimization, and characterization of advanced sorbent materials for selective NOx and SOx capture under humid industrial conditions. Based on computational design results provided by project partners, the student will develop functionalized activated carbons, ion-exchanged zeolites, and MOF-based hybrid composites with improved adsorption selectivity, moisture stability, and low-temperature regeneration capability. The work will include investigation of adsorption mechanisms, binding thermodynamics, NO and NO2 discrimination, and the effects of SO2 cross-interference using advanced characterization and adsorption testing techniques. The research will also address sorbent durability under realistic gas mixtures containing impurities, while optimizing material formulations for additive manufacturing compatibility and pilot-scale implementation. The project is approved for funding in EIC Pathfinder challenges from waste to value creation.   DUTIES Working as a researcher involves defining your daily tasks and how they will be carried out. You will act and train as a project manager, combined with your development. Involvement with other projects and teaching will occur up to 20 percent of your time.   QUALIFICATIONS Appropriate background for the position is a Master of Science degree in materials science, chemistry or chemical engineering, good knowledge, experience, on sorption and catalysts and their characterization. The candidate must be good at written and oral English. Experience in processing science, porous materials, and synthetic chemistry is advantageous.   INFORMATION Employment as a doctoral student is time-limited to 4 years, teaching and other department duties can add up to 20% of full-time. Place of employment is Luleå at the Department of Engineering Science and Mathematics, Division for Materials Science.   For further information please contact: Professor Farid Akhtar, +46 920-49 1793 mailto:farid.akhtar@ltu.se Professor Alberto Vomiero, +46 920-49 3139 mailto:alberto.vomiero@ltu.se   Union representatives: SACO-S Diana Chroneer, +46 920-49 2037 mailto:diana.chroneer@ltu.se OFR-S Marika Vesterberg, +46 920-49 1721 mailto:marika.vesterberg@ltu.se   Luleå University of Technology works actively with gender equality and diversity, contributing to a creative study and work environment. The university's values ​​are based on respect, openness, cooperation, trust and responsibility.   APPLICATION We prefer that you apply for this position by clicking on the apply button below. The application should include a CV, personal letter and copies of verified diplomas from high school and universities. Mark your application with the reference number below. Your application, including diplomas, must be written in English or Swedish. Closing date for applications: August 9, 2026 Reference number: 3877-2026

Description: Aquark Technologies is a start-up with a vision to create disruptive technology in sensing and quantum computing by delivering the world’s most portable, scalable and high performing miniaturised cold atom systems. As a Vacuum Materials Scientist, you will directly develop the technology used to improve vacuum performance that underpins our quantum sensor technology. You will research, test, and define materials, coatings, and getter strategies, and design and interpret experiments to ensure our systems reliably achieve and maintain ultra-high vacuum over extended timescales. The understanding and development of stable alkali vapour systems, including achieving long-term control of vapour pressure and compatibility within sealed environments, will be key. This role sits within a research programme (funded by UKRI FLF) to transform traditional vacuum hardware into compact, robust, and scalable platforms, enabling a shift from bespoke laboratory setups to manufacturable, off-the-shelf solutions. Working at the intersection of vacuum science, materials engineering, and microfabrication within a fast-paced startup environment, you will collaborate with a driven team to deliver innovative, high-impact technologies while contributing to the growth of a dynamic and evolving company.   Responsibilities: * To improve vacuum quality and lifetime, including investigating appropriate materials, getters, gas permeation barriers, long-term sealing methods, and vacuum stability. * Develop alkali vapour systems, including ensuring stable and controllable rubidium operation under UHV conditions, and vapour cell environments. * Develop and apply modelling and simulation tools to predict vacuum performance, as needed. * Provide technical direction for experimental collaboration with other team members. * Carry out production coatings using established, optimised processes to deliver consistent and repeatable results, as needed.   Qualifications: Essential · PhD (or equivalent experience) in Physics, Materials Science, or a related field * Strong expertise in vacuum-compatible materials, surface interactions, ultra-high vacuum (UHV) systems and vacuum physics (outgassing, permeation, leak detection).   Desirable * Knowledge of thin-film getter coatings * Experience with alkali vapour systems (e.g. rubidium) and sealed environments * Proven ability to design experiments and analyse data to guide technical decisions. * Ability to work independently, problem-solve, demonstrate initiative, and engage in continuous learning to adopt new skills. * Ability to work collaboratively across disciplines in a fast-paced R&D environment   Renumeration: * Total salary and bonus up to: £46,000 to £72,000 (salary dependent on experience) * Base salary: £39,428.57 to £61,714.29 * Company Milestone Bonus Scheme, up to: £6,571.43 to £10,285.71 (2x £3,285.71 to £5,142.86 payments). * Full earnings pension contribution: * Employer contribution – 3% * Employee contribution – 4% * Relief at source – 1%   Other Benefits: * Private Medical Insurance . * Group Life Insurance . * Employee Assistance Programme. * 26 Days of holiday + Public holidays. * Flexibility around core hours. * Regular company outings, team building and training opportunities. * Electric Vehicle Salary Sacrifice. * Encouraged learning to continue professional development.

The European Spallation Source (ESS) is one of the largest science and technology infrastructure projects being built today. It will provide researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. We are now looking for an Instrument Scientist for the DREAM powder diffractometer. The position is with the Diffraction & Imaging Division.   About the division  The Diffraction & Imaging Division consists of the scientific staff that are leading the instrument construction projects and the staff that will eventually execute the day-to-day operations of six neutron instruments. The upcoming responsibilities of the division are  Finalize the installation and commissioning of all instruments in the division Deliver state-of-the-art scientific capabilities for internal and external users to enable the wider science community to advance science and technology  Deliver scientific results from the neutron instruments in collaboration with the user community and other divisions in the science directorate  Plan and implement further developments and upgrades of the instruments Push the state-of-the-art capabilities of neutron instrumentation to make maximum benefit from the ESS source.     Main Responsibilities   The DREAM instrument is a neutron powder diffractometer that offers great flexibility for crystal and magnetic structure studies of ordered and disordered materials. The construction of the instrument is completed. The immediate mission is to commission the instrument with neutrons. Commissioning with neutrons is expected to begin in 2027 and continue through 2028, after which the instrument will transition into operation within the ESS user programme. The instrument scientist will work closely with the core instrument team at ESS, comprising another instrument scientist, an instrument computational scientist, and an instrument operational engineer, and in strong interaction with partner institutions and ESS technical services. The successful candidate must be active in a scientific field of direct relevance to DREAM.     Essential qualifications and experience:   PhD in experimental studies in the physical sciences relevant to the DREAM scientific programme, preferably in energy or nanoscaled materials.  Practical experience in neutron powder diffraction   Working knowledge of the data analysis for diffraction software GSAS-II, TOPAS, FullProf, Jana2006, PDFgui  Evidence of an independent research profile in relevant science areas supported by a publication record   Ability to work collaboratively and individually  Good interpersonal communication and presentation skills, and the ability to interact effectively with staff and users at all levels.  Flexibility to requests to work out-of-hours to support users  Responsible attitude to personal safety and the safety of others  Willingness to international travel      Desirable experience:  Experience with user operation at a large-scale neutron facility  Experience with time-of-flight neutron powder diffraction   Experience with pair-distribution function (PDF) measurements   Practical experience in operating complex sample environments relating to neutron powder diffraction.  Experience of working in an international environment is preferred and excellent oral and written English skills are prerequisites. Our work environment is characterised by fast growth, a fast pace of work, and an international atmosphere with highly skilled personnel. You must therefore enjoy the diversity of such an environment and have a personality suited for the challenges it presents. Our work environment is exciting and forward thinking and relies heavily on personal initiative.    Duration & Location  The position is a 3 year fixed term role and the workplace will be situated in Lund, Sweden. Travelling is expected if the need arises.    Application & Contact  A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary.  If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website. Submit your application as soon as you can, no later than August 16, 2026.  The recruitment process will have one round of initial interviews via Zoom in end of August and beginning of September and onsite interviews at ESS in the end of September. Part of the onsite interview will be to hold a scientific talk (seminar) that will be open to all ESS employees.   This role requires additional background screening processes and health and safety checks, which will be performed during the recruitment process.  For further information regarding the position, please contact Talent Acquisition Specialist Louise Jönegård on louise.jonegardmailto:email@ess.eu or Hiring Manager Mikhail Feygenson on mailto:mikhail.feygenson@ess.eu.    For trade union information, please contact Unionen representative Nuno Elias on mailto:nuno.elias@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:marc.kickulies@ess.eu   We look forward to receiving your applications soon!

Context The Diffraction Group at the Institut Laue-Langevin (ILL) in Grenoble, in collaboration with the Instituto de Ciencia de Materiales de Barcelona (ICMAB-CSIC) and the Universidad Complutense de Madrid (UCM), has an immediate opening for a two-year postdoctoral position funded through the Spanish Scientific Member agreement. The project focuses on emergent phenomena in transition metal oxides exhibiting unconventional frustrated magnetic and quantum phases. The materials under study include non-collinear magnets, such as complex ferrites with chiral states of remarkable stability, and frustrated negative charge-transfer oxides with hidden symmetries. The aim is to advance the design, understanding, and control of emergent states in quantum materials with non-collinear magnetism and symmetry-protected properties of interest for magnetoelectric and spin-lattice-driven applications. The research relies primarily on neutron techniques, with emphasis on single-crystal neutron diffraction and the exploitation of polarized neutrons and polarization analysis. Complementary techniques based on resonant X-ray scattering (RMXS/RIXS) are also of interest. Based at ILL, the position offers the opportunity to interact with a diverse community of scientists across European neutron, synchrotron, and FEL sources, and to carry out research stays of varying duration in the two partner laboratories in Barcelona (ICMAB) and Madrid (UCM). It is an interdisciplinary role bridging chemistry, solid state physics, and advanced characterization using quantum beams. Your tasks The successful applicant will be expected to: . Contribute to the synthesis, preparation, and advanced characterization of functional materials, with a primary focus on neutron scattering (single-crystal and powder diffraction), complemented by X-ray diffraction and spectroscopy when relevant. . Design, prepare, and submit competitive beamtime proposals at large-scale facilities, primarily neutron sources, while also considering complementary experiments at synchrotron and other scattering facilities. . Actively collaborate with partner institutions, including Spanish national laboratories and academic partners, contributing to joint experimental campaigns, data analysis, and scientific discussions. . Perform data reduction, analysis, and interpretation using state-of-the-art software tools, ensuring high- quality and reproducible results. . Disseminate research outcomes through high-impact publications and presentations at national and international conferences, workshops, and meetings. . Travel to Spanish national laboratories and other European neutron and synchrotron sources to complement the work conducted in Grenoble. Your profile . PhD in Physics, Chemistry, Materials Science, or a closely related field. . Strong track record in the fields of magnetism and electronic properties. . Experience in neutron and synchrotron diffraction, preferably on single crystals. . Expertise in state-of-the-art materials synthesis and single-crystal growth techniques would be an asset. . Experience in interdisciplinary research collaboration would be an asset. What we offer Quality of life - This position is based in Grenoble, a hub for research and technology, ideally located in the heart of the French Alps (just 3 hours from Paris/Provence by train, 1 hour from Lyon international airport and 1 ½ hours from Geneva). It is important for us that our staff achieve a healthy work-life balance. We therefore offer home working (under certain conditions), generous annual paid leave entitlement and a host of other benefits that you will discover when you arrive! Prospects: We guarantee you a stable Postdoctoral position in a multicultural scientific environment. Benefits - We offer generous social benefits (expatriation allowance, excellent health cover), moving and relocation assistance (under certain conditions) and an annual productivity bonus. We also offer language courses for you and your partner and subsidies for the use of public transport and the staff canteen, as well as for holidays and a variety of cultural and sports activities. For more details, visit https://www.ill.eu/careers/working-at-the-ill/employment-conditions Sounds interesting? Then why not take your next career step with us by applying online - preferably in English - via our career portal by 30.08.2026, quoting reference number 26/32 with a list of publications and the names of 3 referees, including one from your present work place. A concise statement of scientific interests (1-2 pages maximum) is also required, outlining previous and current research directions, with particular emphasis on experience in scattering techniques and work carried out at large-scale research facilities. Applicants should clearly describe their individual contributions and level of involvement in the different aspects of their research work. Please note that all applicants are subject to administrative screening (background checks). For this post, medical fitness, including for work under ionising radiation, is required. We are committed to equal opportunities and diversity and therefore welcome applications from all suitably qualified candidates.

Are you ready to take the next step in your academic journey? As a doctoral student with us, you will work closely with leading researchers in a strong, international research environment, with access to advanced laboratory equipment and solid funding opportunities. You will be offered secure employment, high-quality supervision, and room to grow, both as a researcher and as a person.   The research subject of Building materials (https://www.ltu.se/en/research/research-subjects/building-materials?l=en) consists of 15 persons, including four professors and two postdocs. The subject focuses on the development of sustainable materials and production technologies for the construction industry, as well as on ice and arctic conditions-related research and education.     Subject description Building Materials includes sustainable building materials and their application technologies, recycling and reuse, and applied building physics, especially focusing on the Arctic conditions.     Project description The production of Portland cement still cannot be qualified as an environmentally friendly process due to high CO2 emissions from burning fuels, calcination of limestone, and the negative effects of mining operations. Several solutions are being implemented worldwide, but none have provided an efficient solution. This project aims to study the possibility of substituting the high-temperature clinkering process with a cold synthesis based on mechanochemistry.     Duties As a PhD student, you are expected to perform both experimental and theoretical work within your research studies as well as communicate your results at national and international conferences and in scientific journals. The tasks will include laboratory tests, analysis of data, and modeling.     Qualifications To be eligible, you must have a master’s degree in materials science or chemistry. You should have basic knowledge of building materials, and you should be fluent in English. The following working/research experience will be of advantage: molecular dynamics modelling (with e.g., LAMMPS open-source software), Thermodynamic modelling, XRD with Rietveld analysis, SEM, TG, DSC, micro-CT, Particle size analysis, calorimetry, and AFM.    For further information about a specific subject see http://www.ltu.se/research/Utbildning-pa-forskarniva/Studieplaner/Allmanna-studieplaner-Teknisk-fakultetsnamnd?l=en     Further information Employment as a PhD student is limited to 4 years, teaching and other department duties may be added with max 20%. Placement: Luleå. Starting: January 1, 2027   For further information about the position, please contact Professor Andrzej Cwirzen, (+46) 920-49 3387, andrzej.cwirzen@ltu.se   Union representatives: SACO-S Diana Chroneer,(+46 ) 920-49 2037, diana.chroneer@ltu.se OFR-S Marika Vesterberg, (+46) 920-49 1721, marika.vesterberg@ltu.se   In case of different interpretations of the English and Swedish versions of this announcement, the Swedish version takes precedence.     Application We prefer that you apply for this position by clicking on the apply button below. The application should include a CV, personal letter and copies of verified diplomas from high school and universities. Mark your application with the reference number below. Your application, including diplomas, must be written in English or Swedish. Recruitment communication and possible interviews may be held in English.     Closing date for applications: August 15, 2026 Reference number: 3267-2026

Are you interested in advancing materials for safe and reliable nuclear power using cutting-edge characterization techniques? Join our team at Chalmers to explore corrosion mechanisms in zirconium alloys at the atomic scale and contribute to the development of next-generation nuclear materials. About us  The research at the Division of Microstructure Physics focuses on experimental investigations of engineering materials using advanced characterization techniques. We mainly use electron microscopy, atom probe tomography (APT) and large scale facilities (synchrotron and neutron scattering). The research primarily deals with the relation between microstructure and properties, and how this relationship is influenced by processing and in-service degradation. Among the materials studied, steel, hard coatings, zirconium alloys and high entropy materials are central. The applications are often related to energy and sustainability. About the research project   Nuclear fuel is enclosed in cladding tubes made from zirconium alloys. To improve reactor safety and economic performance, new alloys are continuously being developed. In this project, the corrosion behaviour of a novel zirconium alloy will be investigated to improve our understanding of the underlying corrosion mechanisms and support the development of next-generation materials. Advanced characterization techniques, including electron microscopy and atom probe tomography, will be used to study corrosion processes at the atomic scale. Who we are looking for The following requirements are mandatory: To qualify as a Doctoral student, you must have a Master's degree (masterexamen) of 120 credits or a Master’s degree (magisterexamen) of 60 credits* in Physics, Chemistry, Materials Science or Mechanical Engineering. Strong written and verbal communication skills in English  Experience in materials science   *for students with an education earned outside of Sweden, a 4-year Bachelor’s degree is accepted.  The following experience will strengthen your application:  Experience in electron microscopy and atom probe tomography Interest in nuclear technology What you will do Take courses at an advanced level within the Graduate school of Materials Science or Physics ( https://www.chalmers.se/en/research/we-train-new-researchers/graduate-schools/ )  Develop your own scientific concepts and communicate the results of your research verbally and in writing  The position generally also includes teaching on Chalmers' undergraduate level or performing other duties corresponding to max. 20 percent of working hours Investigate Zr alloy samples using electron microscopy, atom probe tomography, etc. to understand degradation phenomena like corrosion  Contract terms   The Doctoral student positions are fully funded from start.  The position is a fixed-term appointment of four years, with the possibility to teach up to 20%, which extends the position up to five years.  A starting salary of 35,725 SEK per month (valid from May 1, 2026).  Doctoral studies require physical presence throughout the entire study period. A valid residence permit must be presented by the study start date; otherwise the admission may be withdrawn.  What we offer  As a Doctoral student at Chalmers, you are an employee and enjoy all employee benefits. Read more about  https://www.chalmers.se/en/about-chalmers/work-with-us/ and our https://www.chalmers.se/en/about-chalmers/work-with-us/chalmers-as-an-employer/benefits-and-conditions/ for employees.  A dynamic and inspiring working environment in the coastal city of https://www.goteborg.com/en.  Read more about Sweden’s generous parental leave, subsidized day care, free schools, healthcare etc at https://www.movetogothenburg.com/  Chalmers is dedicated to improving gender balance and actively works with equality projects, such as https://www.chalmers.se/en/about-chalmers/organisation-and-governance/equality/genie-gender-initiative-for-excellence/. We celebrate diversity and consider equality and inclusion as fundamental aspects of all our activities.  If Swedish is not your native language, Chalmers offers Swedish courses to help you settle in. Find more general information about doctoral studies at Chalmers https://www.chalmers.se/en/research/we-train-new-researchers/about-doctoral-studies/.   Application procedure  The application should be written in English and attached as PDF-files, as below. Maximum size for each file is 40 MB. Please note that the system does not support Zip files.  CV  Personal letter  A brief introduction about yourself.  A brief motivation as to why you are interested in this position.  Bachelor’s and, if available, master’s thesis together with the transcripts.  Use the button at the foot of the page to reach the application form.   A background check may be conducted as part of the application process.   Please note: The applicant is responsible for ensuring that the application is complete. Incomplete applications and applications sent by email will not be considered. Contact details to references will be requested after the interview.    We welcome your application no later than August 14.     For questions, please contact:   Mattias Thuvander  Professor  mattias.thuvander@chalmers.se  +46 31 772 3322   We look forward to your application!  *** Chalmers declines to consider all offers of further announcement publishing or other types of support for the recruiting process in connection with this position. ***    Chalmers University of Technology in Gothenburg conducts research and education in technology and natural sciences at a high international level. The university has 3100 employees and 10,000 students, and offers education in engineering, science, shipping and architecture. With scientific excellence as a basis, Chalmers promotes knowledge and technical solutions for a sustainable world. Through global commitment and entrepreneurship, we foster an innovative spirit, in close collaboration with wider society.    Chalmers was founded in 1829 and has the same motto today as it did then: Avancez – forward.

Do you want to shape how advanced wear materials perform in crushing solutions worldwide - while lowering environmental impact at the same time? At Business Area Rock Processing, material technology is a true differentiator, and this role turns cutting-edge research into real industrial and commercial value. Why Sandvik? We offer you a senior expert role where material science, sustainability, and business impact come together, giving you real influence over technology direction and product strategy. You lead advanced research from idea to industrialization and collaborate closely with universities, research institutes, and experts across the Sandvik Group. About the job As Subject Expert for Material Development, you ensure material technology leadership for current and future crushing solutions. You act as the go-to expert for wear material properties, new alloy development, and advanced research initiatives, working closely with product design, R&D, and external partners. You report to the Technology Development Manager. Job responsibilities Drive current and future material technology development for wear parts Define and execute the material development roadmap together with R&D managers and product owners Lead advanced research projects internally and with external partners and universities Prepare new material technologies for design teams and commercialization Strengthen and manage the IP portfolio linked to material innovations Support design, development, and market teams with material expertise and issue management Location and flexibility The role is based in Svedala, Sweden. Travel is a natural part of the position, reflecting close collaboration with partners and stakeholders across locations. Your profile You’re a materials expert with deep, hands-on knowledge in cast steels and a strong drive to push advanced material development in an industrial context. Your background combines scientific depth with the ability to lead and collaborate in complex research environments. Your background includes: A PhD in Materials Science Extensive experience in advanced material development within industrial environments, with a strong focus on cast steels Solid expertise in alloy design, structure–property relationships, and microstructural evolution Strong understanding of solidification theory and its impact on material performance Proven experience leading research projects and driving external collaborations, including work with universities and research institutes Knowledge of IP strategy, IP portfolio development, and governmental research funding You’re comfortable operating at the intersection of research and industry, and you know how to translate deep materials knowledge into long-term value. Our culture At Sandvik, we’re tech driven, innovative and entrepreneurial. We believe that success is a team effort so we value diversity and are committed to creating an inclusive culture where people can be themselves and reach their full potential. So, we invest in supporting each other, learning together and celebrating our differences. Visit our stories hub, LinkedIn or Facebook to get to know us further. Contact information For further information about this position, please contact Nicolas Dela, hiring manager, nicolas.dela@sandvik.com. We’ve already decided on which advertising channels and marketing campaigns we wish to use and respectfully decline any additional contacts in that matter. Union contacts – Sweden Mårten Lindberg, Unionen, +46 (0)76 111 03 36 Jonny Hansson, Akademikerföreningen, +46 (0)76 126 45 81 Michael Wicktor-Ohlsson, Ledarna, +46 (0)70 251 44 57 Recruitment Specialist: Ulrika Gruffman At Sandvik, we value a healthy work‑life balance and will be away on summer vacation. Therefore, it can be difficult to reach us, and the recruitment process might take longer than usual. The interviews are planned to take place in August. How to apply Send your application no later than July 31st, 2026. Click apply and include your resume and cover letter in English. Please note that we don’t accept applications by e-mail. Job ID: R0092553. We aim for an open and fair recruitment process and use different tools to ensure an objective assessment. Later in the process, you may be invited to complete a personality and logic test. To learn more about our recruitment process, please visit our career site or contact HR Services at hrservices.sweden@sandvik.com Business area Rock Processing is a global leading supplier of equipment, service, and technical solutions for crushing, screening, breaking and demolition in the mining and infrastructure industries. In 2025, sales were approximately SEK 10 billion with about 2,800 employees.

Help operate one of Europe’s most advanced scientific facilities. The European Spallation Source (ESS) is one of the largest science and technology infrastructure projects being built today. ESS will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. About the role: We are looking to build up our team of Operators to join our Remote Handling (RH) Group. The RH Group plays a key role in operating, maintaining, and developing the equipment used for transferring and processing radioactive components and waste within the ESS Active Cells Facility (our environment for handling radioactive components safely) using specialised Cask Assemblies. You will work with highly specialised remote handling systems, heavy lifting equipment, Virtual Reality-supported operations, and complex electromechanical systems in a unique radioactive waste handling and maintenance environment. If you enjoy complex technical challenges, hands-on engineering work, problem solving, and working with advanced equipment in a highly collaborative international environment, this role offers something genuinely different. What you’ll do: Our highly specialised remote handling systems are designed for environments where direct human access is impossible. As a Remote Handling Operator, you will help commission, prepare, operate, maintain, and develop the equipment used for transferring and processing radioactive components and waste - both manually and remotely - in one of the world’s most demanding engineering environments. You will work with: Telemanipulators and haptic robotic systems. Remotely operated cranes and lifting systems. Remote cutting and machining equipment. Radioactive waste management using specialised transport containers for handling radioactive waste. Camera-guided and VR-supported operations. Various complex electromechanical systems. Remote handling tooling and inspection devices. Day to day, you will: Provide technical support in preparing work procedures and risk assessments. Support commissioning, testing, maintenance, and rebuilding activities. Operate and maintain specialist remote handling equipment. Troubleshoot complex mechanical and electromechanical systems. Work closely with engineers to improve equipment reliability and maintainability. Produce and update technical and maintenance documentation. Support workshop and fabrication activities where required. Contribute to safe operations within radiation-controlled environments. Support planning activities for large-scale lifting and maintenance operations. This is not a standard operator role. You will develop and operate systems designed for environments where direct human intervention is impossible. The work combines precision engineering, robotics, remote operations, maintenance strategy, heavy mechanical systems, and emerging technologies such as camera-guided and VR-supported operations. ESS will provide extensive specialist training, including opportunities to collaborate with internationally recognised remote handling experts. This position is a full-time, permanent role with a 6-month probationary period. It is based at the brand-new https://youtu.be/d5h4bIEfM5Q?si=W28A9wLAkYK3HOXJ. About you: This is a unique opportunity to work at the intersection of advanced engineering, robotics, heavy mechanical systems, camera-guided and VR-supported operations, and nuclear technology within one of Europe’s most advanced technical environments. We’re therefore looking for practical, motivated individuals who enjoy technical problem solving, teamwork, and hands-on engineering work in complex environments. You should have: At least 3 years of experience in an engineering or industrial technician/operator role. Experience working within formal work control or regulated industrial environments. Strong mechanical or electromechanical skills. Experience working from engineering drawings and schematics. Experience assembling, testing, commissioning, or maintaining industrial equipment. Experience producing or following technical maintenance documentation. Safe operation experience with workshop machinery and tools. Good English communication skills, written and spoken. Experience in any of the following would be an advantage: Remote handling systems or robotics. Nuclear, radioactive, offshore, aerospace, fusion, or other high-integrity industries. Heavy lifting or crane operations. PLC troubleshooting or controls systems. Machining, fabrication, CNC, or wire saw operation. VR-based tools or digital engineering environments. To apply: A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website. Submit your application as soon as you can and quote the job reference number ESD-73309 in your application. This role requires additional background screening processes and health and safety checks, which will be performed during the recruitment process. For further information regarding the position, please contact Talent Acquisition Specialist Daniel Nordin Baker on mailto:Daniel.Nordin@ess.eu For trade union information, please contact Unionen representative Nerusha Naicker on mailto:erusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:marc.kickulies@ess.eu

Department of Forest Bioeconomy and Technology Do you want to help shape the future of sustainable materials? We are seeking a highly motivated postdoctoral researcher to advance the design of next-generation bio-based adhesives that meet both sustainability targets and industrial performance requirements. In this project, you will combine cutting-edge approaches in polymer science and AI-driven modelling to develop predictive frameworks and high-performance adhesive systems for furniture, construction and packaging industries. You will work at the interface of fundamental science and real-world application, contributing to the transition toward a more sustainable materials economy. If you have a strong research background and a drive for innovation, this position offers an exciting opportunity to take the next step in your academic career! The recruitment is done within the BioGlue-Centre “Competence Centre for Bio-based Adhesives”, which is a Vinnova Competence Centre in Sustainable Industry and Digital Transformation. The vision of the Centre is to significantly reduce the dependency on fossil-based materials in the adhesive industry by developing paradigm-shifting knowledge of bio-based adhesives and becoming a world-leading research environment in Sweden. It is built around a network of top-scientists with expertise in polymer science, adhesives, technology, and sustainability located at the Department of Forest Bioeconomy and Technology at SLU (https://www.slu.se/en/about-slu/organisation/departments/department-of-forest-bioeconomy-and-technology/), the Department of Fibre and Polymer Technology at KTH (https://www.kth.se/fpt/fibre-and-polymer-technology-1.778696), and the Department of Forestry and Wood Technology at Linnaeus University (https://lnu.se/en/meet-linnaeus-university/Organisation/faculty-of-technology/meet-the-faculty-of-technology/forestry-and-wood/). The Centre unites 13 companies along the value chain in furniture, packaging and construction sectors that share the same research questions around adhesives and adhesive bonding. About the position The development of bio-based adhesives is currently limited by a lack of predictive understanding of how formulation chemistry translates into material performance. This project addresses this challenge by establishing a data-driven framework for the rational design of high-performance bio-adhesives. As a postdoctoral researcher, you will work on integrating experimental formulation, molecular-level characterization, and machine learning to develop predictive models linking chemical descriptors to adhesive properties. The work includes the development of a structured formulation library, systematic mapping of key performance indicators, and the implementation of data-driven optimization strategies to identify high-performing systems. Machine learning approaches will be used to uncover structure-property relationships and guide formulation design. The project combines experimental and computational approaches and includes validation of selected formulations on industrially relevant substrates. You will collaborate closely with academic and industrial partners and contribute to the development of a transferable predictive toolbox for next-generation sustainable adhesives. Your profile We are seeking a highly motivated postdoctoral researcher with a doctoral degree obtained within the last three years in materials science, polymer science, chemistry, chemical engineering, or a closely related field. The ideal candidate has strong expertise in polymer formulation and structure-property relationships, particularly in the modification and crosslinking of bio-based or functional polymers for adhesive or related applications. Experience with advanced material characterisation techniques is expected. A strong interest in data-driven research is essential. Experience with modelling approaches, data analysis, or machine learning applied to materials or chemical systems is considered a strong merit. You are expected to have excellent communication skills in English, both written and spoken, and a clear motivation to pursue an academic career. The ability to work independently, take initiative, and collaborate effectively in an interdisciplinary and international research environment is essential. In the evaluation of candidates, particular emphasis will be placed on (1) scientific excellence in polymer and materials science, (2) experience or demonstrated potential in applying machine learning and data-driven approaches to materials or formulation design, and (3) the ability to contribute to and expand ongoing research activities within the group. About us The Department of Forest Bioeconomy and Technology at SLU brings together expertise in technology, natural and social sciences. The department provides world-class interdisciplinary environment for research and education in the circular bioeconomy, with activities at the campuses in Umeå and Uppsala, and nationally and internationally. Our work spans the entire value chain of the forest-based bioeconomy – from analysing how resources can be used and governed to developing technologies, materials, and industrial processes for sustainable bio-based products and systems. The Department is responsible for education at the bachelor’s, master’s, and doctoral levels and collaborates closely with both industry and academia nationally and internationally. With us, you can help shape a more sustainable bio-based society. For more information about the department or division visit: https://www.slu.se/om-slu/organisation/institutioner/skoglig-bioekonomi-och-teknologi/?gad_source=1&gad_campaignid=21086656031&gclid=EAIaIQobChMIwMj3yOmalQMVdluRBR3n7yxAEAAYASAAEgKD_fD_BwE Read more about our benefits and working at SLU by visiting: https://www.slu.se/en/about-slu/work-at-slu/ Location: Uppsala Form of employment: Temporary employment 24 months, with the possibility of extension. Scope: 100% Start date: The position may start as agreed between both parties but not later than January 1, 2027. Application: Please submit your application before deadline 16 August 2026. You can submit your application by clicking the button below. Union representatives: https://internt.slu.se/en/my-employment/employee-associations/kontaktpersoner-vid-rekrytering/

Project Controls Manager  The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science.  We are now looking for a Project Controls Manager to oversee the operational and development project scope at ESS.     About the role:  The Project Controls Manager (PCM) plays a critical role in ensuring the best use of the human and financial resources for the ESS organisation. They are responsible for establishing and maintaining the systems, processes, and governance needed to plan, monitor, and control organisational performance and the ESS programme. The role provides leadership across planning and scheduling, cost control, risk management, change control, and reporting to support informed decision-making and successful delivery. Working closely with project managers, technical leads, finance, procurement, operations, and other stakeholders, the PCM will have a central overview of both the operational and development project scope.  This is a permanent role based at ESS campus in Lund, Sweden.     Day-to-day, you will:  Supervise a team managing cost control, planning, risk, change control and reporting functions.   Lead the development, maintenance, and governance of integrated schedules using Primavera P6. This includes long term strategic planning, shutdown planning and development project planning.   Establish baseline schedules, progress measurement methods, and schedule update routines to support accurate forecasting and performance tracking.   Establish yearly budgets, cost reports, forecasts, and performance metrics.   Monitor actual cost and commitments against budget and forecast, identifying trends, variances, and corrective actions.   Implement and maintain project risk management processes, including risk identification (threats and opportunities), assessment, mitigation planning, and monitoring.   Manage project change control processes to ensure that scope, schedule, cost, and risk impacts are properly assessed, approved, and recorded.   Prepare and issue regular project controls reports, dashboards, and management summaries for key stakeholders.   Support decision-making through scenario analysis, performance insight, and timely escalation of issues and risks.   Ensure alignment and consistency between planning, cost, risk, and reporting data across the project controls function.   Collaborate with project managers, work package owners, finance, procurement, and contractors to maintain robust project controls.   Contribute to continuous improvement of project controls standards, tools, templates, and governance.    About you:  University degree in engineering, science, project management, or a related field, or equivalent relevant professional experience.  Proven experience in project controls within large-scale technical, scientific, infrastructure, industrial, or engineering environments.  Proven experience leading and supervising multidisciplinary teams across planning, cost control, risk, change control, and reporting functions.  Experience establishing and managing project budgets, forecasts, cost reporting, and performance metrics.  Solid understanding of project governance, risk management, change control, and project lifecycle management principles.  Strong analytical and problem-solving skills, with the ability to identify trends, assess risks, and support decision-making.  Demonstrated ability to take initiative, and drive actions in a complex stakeholder environment.  Proven ability to lead, motivate, and supervise teams while fostering collaboration and accountability.  Excellent written and verbal communication skills, including experience preparing reports and presenting information to diverse stakeholders.  Ability to work effectively in an international, multidisciplinary environment with multiple technical and operational interfaces.    To apply:  Working at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary.  If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “Apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website.  For further information regarding the recruitment process, please contact Talent Acquisition Specialist Louise Jönegård at louise.jonegard@ess.eu.   For trade union information, please contact Unionen representative Nerusha Naicker on mailto:erusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:marc.kickulies@ess.eu

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. About the role: The Scientific Support Division at ESS is looking for a Biodeuteration Scientist to support the ESS neutron user program. The Deuteration group at ESS operates a support service providing deuterium-labelled samples for the scientific users of the ESS neutron instruments for carrying out a broad range of experiments primarily in materials and life science research.   In this position, you will play an important role in ensuring the success of biological and biomaterial experiments at ESS by further developing methods for the biological production of a range of deuterated biomolecules, contributing deuterated materials for user proposals and requested by ESS users, and optimising purification and analysis capabilities. In the ESS Deuteration group, we also work in close collaboration with our international colleques at other deuteration laboratories. In this role, you will: Provide deuteration services for neutron experiment users, including the production, purification and characterization of a variety of biologically deuterated molecules. Further develop ESS capabilities for biodeuteration as well as related purification and analysis methods, in order to meet the evolving needs of the ESS scientific user program. Coordinate the planning, organization and operation of ESS biodeuteration support including proposal calls, feasibility reviews and proposal work scheduling. Maintain and operate the biological deuteration facilities of ESS in collaboration with the Lund Protein Production Facility at Lund University hosting our biodeuteration activities. Supervise and provide technical guidance to visitors and hosted students and postdocs working on biodeuteration projects. Participate in external and internal collaborations to enhance ESS biodeuteration capabilities and scientific output of the user programme. Disseminate results and method developments through publications in peer-reviewed journals and at relevant scientific meetings as appropriate. Collaborate with Deuteration laboratories at other large-scale research infrastructure to to ensure continuing development of Deuteration services ESS. This is a full-time permanent position based at the brand new https://www.youtube.com/watch?v=d5h4bIEfM5Q About you: We're seeking an experienced and highly motivated biochemist/biologist with a PhD in biology, molecular biology, biochemistry or biotechnology and a strong track record of the expression of biological molecules in microbial cell cultures for research. You have experience of bacterial and yeast expression systems and biochemical modifications and purification methodologies. In addition to designing biological production processes and optimising purification methods, you also bring deep expertise and understanding of modern cell culturing and analytical techniques - including automated fermentation systems, purification technologies and biophysical characterisation methods. Experience in protein ligation-mediated polypeptide engineering, and/or genetic engineering of microbial expression systems is an advantage. You take pride in delivering reliable results on time, and you thrive in both independent and collaborative settings. Comfortable working with colleagues and neutron users from many disciplines, you have a service-minded proactive approach and an eagerness to contribute to a fast-paced, international research environment. Communicating clearly in English - both written and spoken - comes naturally to you, and you're confident engaging with colleagues from a wide range of technical backgrounds and presenting your work at conferences.  If you’ve worked with biological deuteration previously, that’s a strong advantage. So is experience operating automated bioreactor systems, experience with higher eukaryotic cell culturing, biomolecule production and purification at mg-g scale, or supporting user-driven custom projects in research, infrastructure or contract environments. You’re someone who wants to contribute to the bigger picture outside your own lab work – both scientifically but also practically by acting as a driver for the development of new capabilities, maintaining high safety standards, caring for shared infrastructure, and keeping instruments in top condition. Most importantly, you bring curiosity, scientific rigour, and a team-oriented spirit to everything you do. To apply: A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is August 25th. Please note that 1st zoom interviews will take place mid September and onsite interviews mid October. For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on sofie.berg@ess.eu or Hiring Manager Hanna Wacklin-Knecht - Head of the Scientific Support Division on mailto:hanna.wacklin-knecht@ess.eu     For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careersFor trade union information, please contact Unionen representative Nerusha Naicker on Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at Marc.Kickulies@ess.eu

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science.   The Science Directorate at the European Spallation Source (ESS) invites applications for an instrument scientist for the dedicated Test beamline (TBL).   The Diffraction and Imaging Division is home to the instrument scientists and instrument operational engineers responsible for designing, constructing, and operating the DREAM, MAGiC, BEER, HEIMDAL, ODIN, and TBL instruments at ESS. New designs for a wide range of neutron instruments are being implemented to fully leverage the unique long-pulse time structure of the ESS neutron source.   The primary purpose of TBL is characterizing the target-reflector-moderator system and verifying the performance of the neutron source based on operating parameters such as proton beam energy, stability, pulse length, and beam rastering, as well as the moderator conditions. An important aspect of this work will be comparing the measured and simulated neutronic performance of the moderator, providing a crucial reference for various neutron scattering instruments. Additionally, the TBL will contribute to optimizing instruments and methods to fully exploit the unique long-pulse time structure of the ESS neutron source. The TBL will function as a local characterization station, supporting technical developments in areas such as neutron optics, polarization, and novel detectors. It is designed to support the user program by performing exploratory imaging experiments, neutron diffraction studies, and single-crystal alignment. Due to the flexibility of the instrument, a variety of detectors and sample environments can be fitted inside the experimental cave, allowing multipurpose measurements on not only thermal neutrons but also epithermal/fast neutrons and gamma rays. This includes but is not limited to a well-established technique such as time-of-flight transmission measurements, neutron tomography, neutron activation analysis, grating interferometry, etc. As the facility evolves, the modular design of the TBL will allow for modifications to meet new objectives, ensuring its continued relevance and utility in advancing neutron science. The construction of TBL is completed and the team prepares the instrument for the first neutrons.   About the role:  As the instrument scientist for TBL you will: Work closely with another scientist and the instrument operations engineer, forming the core instrument team. Participate in commissioning of the TBL beamline with neutrons. Develop a diagnostic plan for ESS Operation via the utilization of TBL Develop and implement new experimental methods using the TBL, including (but not limited to) spectroscopic imaging, diffractive imaging, polarized neutron imaging, grating interferometry, neutron depth profiling, prompt-gamma neutron activation analysis (PGNAA), and advanced sample environments, etc. Develop synergies with other neutron facilities and build links with universities.   The position is a 3-year fixed term role and the workplace will be situated in Lund, Sweden. ESS will support and encourage the candidate to take up an adjunct position at a university in an ESS partner country, in order to facilitate their own research.    Please read about the qualifications and experience needed for this position in the full job advertisement on ESS webpage: https://europeanspallationsource.se/careers/vacancies?rmpage=job&rmjob=2026&rmlang=UK   To apply: A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary.   If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is August 16th 2026.   For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on sofie.berg@ess.eu or Hiring Manager Head of Diffraction & Imaging Division, Mikhail Feygenson on Mikhail.Feygenson@ess.eu   Please note that it might take longer than normal to answer questions due to vacation period.      This role requires enhanced security screening processes which will be performed during the recruitment and onboarding processes.For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careers. For trade union information, please contact Unionen representative Nerusha Naicker on Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at Marc.Kickulies@ess.eu