Sökresultat för "R&M"

Vi på R&M salong söker dig som är barbare och kan göra (fade) och vi söker okså en Dam frisör vid intresse mejla ditt ansöka till romyobarsom1987@gmail.com

Nu söker vi dig som vill vara med och påverka hur produktionsutrustning utformas redan innan den byggs och tas i drift. I den här rollen får du möjlighet att använda din erfarenhet inom mekaniskt underhåll för att säkerställa att nya och uppgraderade maskiner blir både driftsäkra och enkla att underhålla över tid. Om rollen Du kommer att arbeta i projekt där fokus ligger på att tidigt i processen säkerställa krav kopplade till tillförlitlighet och underhållbarhet. Det innebär att du rör dig mellan konstruktion, produktion och leverantörer – där du bidrar med din praktiska erfarenhet för att arbeta fram lösningar som fungerar i verklig drift. Dina framtida arbetsuppgifter delta i design- och konceptgenomgångar med fokus på R&M ha dialog med leverantörer för att säkerställa tekniska krav vara med vid mottagning och granskning av ny utrustning bidra i arbetet med reservdelar och slitdelsstruktur ta fram och utveckla PM-planer för förebyggande underhåll skapa underhållsinstruktioner för mekaniskt underhåll och operatörer säkerställa att underhållsdokumentation är korrekt och komplett Vi tror att du har erfarenhet av mekaniskt underhåll i industrimiljö förståelse för arbete kopplat till tillförlitlighet och underhåll (R&M) erfarenhet av att arbeta med underhållsplaner och reservdelar vana från projektmiljö eller tekniska utvecklingsprojekt god förmåga att läsa teknisk dokumentation god svenska och engelska i tal och skrift Om uppdraget Du blir en del av en global industriell miljö där utveckling och produktion möts, med fokus på robusta och hållbara tekniska lösningar i stor skala. Övrig information Start: Omgående Plats: Skövde Omfattning: Heltid Anställningsform: Konsultuppdrag via Wrknest på minst 6 månader med goda chanser till förlängning och överrekrytering. Sök gärna så snart som möjligt då vi jobbar med löpande urval!

At ABB, we help industries run leaner and cleaner—and every person here makes that happen. You’ll be empowered to lead, supported to grow, and proud of the impact we create together. Join us and help run what runs the world. This position reports to: Global R&D/Technology Manager Your role and responsibilities As R&D Manager, you will lead, coach, and develop three teams with mixed competencies while driving innovation and supporting the development of ABB’s next generation of DCS solutions. In this role, you will have the opportunity to lead a team of Research and Development (R&D) employees and support them in achieving agreed R&D targets. Each day, you will coach and develop the team. You will also leverage your expertise to support the management of technologies, platforms, and intellectual property. You will be part of the Control Safety and Integration area within ABB’s global DCS organization and collaborate closely with teams across R&D, product development, and global business lines. Based in Malmö, you will work in a global environment where reliability, safety, and innovation are at the core of everything we do. You will be mainly accountable for: Full responsibility for personnel, including but not limited to recruitment, allocation of work, skills development, and salary setting. Planning and maintaining an appropriate project portfolio for the team. Developing and securing the future competencies needed for next-generation products and systems. Supporting the organization in ongoing change initiatives—not necessarily driving the change, but enabling and strengthening it through strong leadership and collaboration. Ensuring the team remains receptive to the broader organization and aligned with ABB’s long‑term technology roadmap. Qualifications for the role You hold a Bachelor’s or Master’s degree in software development or the equivalent and have a strong technical background. You bring solid leadership experience, preferably as a line manager in a global organization. You have extensive experience in R&D and product development, ideally within a technology-driven environment. You possess strong communication skills and enjoy working with people — coaching, developing, and growing teams is a natural part of your leadership style. You are innovative, collaborative, and comfortable navigating a dynamic environment with both internal and external stakeholders. Experience in industrial automation and functional safety development is an asset. You communicate fluently in English and Swedish. More about ABB We develop today’s and tomorrow’s world‑leading Distributed Control Systems (DCS) for process industries across the globe. Our customers include pharmaceutical companies, mines, refineries, steel mills, and power plants — industries where reliability and safety are essential. In this role, you will contribute to shaping the next generation of DCS products and safety solutions, working closely with R&D teams who use advanced simulation tools, multi‑physics models, and cutting‑edge development methods to ensure performance, safety, and innovation. Recruiting Manager Michael Gienke, +49 172 5231495, will answer your questions about the position. Union representatives: Sveriges Ingenjörer – Peter Medin, +46 703 904 170 Ledarna – Leif Öhrberg, +46 724 64 40 16 Unionen – Mikael Hammar, +46 730 887 060. For other questions, please contact Talent Partner Irma Leijon, +46 72 461 23 14. Building a cleaner, smarter future takes all kinds of minds: the curious, the courageous, and the creative. That's why we welcome people from all backgrounds and experiences. Ready to make an impact? Apply today or visit https://www.abb.com to learn more about the impact of our solutions across the globe.

På ABB hjälper vi industrier att bli mer resurseffektiva och renare – och varje person här bidrar till resultaten. Du kommer att få möjlighet att leda, få stöd att växa och kunna vara stolt över den påverkan vi skapar tillsammans. Gå med oss och hjälp till att driva det som driver världen. Denna position rapporterar till: Global R&D Unit Lead __ Your roles & Responsibilities ABB Traction plays a critical role in shaping the future of electrified mobility. Through our traction motors and Mobile ePower solutions, we enable customers globally to achieve higher efficiency, reliability, and sustainability in rail and off-highway applications. We combine global scale with strong local execution to deliver performance, innovation, and long-term value. To drive sustained technology leadership and innovation, we are appointing a Global R&D Lead for Traction Motors. In this role, you will be at the forefront of shaping the future of traction motor technology. You will define and drive the R&D strategy and roadmap for Traction Motors, translating cutting-edge innovation into real business value for our customers and markets. You will lead the R&D teams in Sweden and China, to drive high performance and meet ambitious targets. You’ll collaborate closely with the Engineering and Manufacturing teams to ensure seamless technology transfer and efficient industrialization of new developments, with Technology and R&D teams within Motion Traction to leverage synergies across the full value chain and align on shared technology directions, as well as with Corporate Research Centers to co-create long-term disruptive innovations and bring next-generation technologies into our product roadmap. You’ll report directly to the Global Product Line Manager – Traction Motors. While the role has a global scope, the position’s location is Västerås, Sweden. You will be mainly accountable for: Define and own the R&D technology roadmap for Traction Motors aligned with business strategy and market needs, ensuring innovation priorities translate to competitive advantage Manage and optimize the R&D project portfolio across Sweden and China, ensuring efficient resource allocation, timely delivery, and quality execution aligned with business objectives Build and nurture strategic relationships across the innovation ecosystem to identify breakthrough technologies and co-create next-generation solutions Lead, coach and develop the R&D teams in Sweden and China, including full line management responsibility in Sweden, foster a culture of innovation and continuous learning, ensure alignment with the global technology roadmap and facilitate cross-site collaboration Drive talent acquisition, capability development and succession planning to attract and retain world-class R&D teams Develop and maintain the competencies, tools, and infrastructure needed to support current and future product development Serve as the technical authority for the team, providing expert guidance on complex technical challenges and supporting both internal and external stakeholder needs Ensure a safe, inclusive, and compliant work environment across Traction Motors R&D locations Qualifications for the Role A Master's degree in Electrical or Mechanical Engineering or a relevant technical field; a PhD is considered as a merit 10+ years of experience in industrial R&D environments, with proven ability to translate technology trends into actionable R&D strategies and roadmaps Extensive hands-on experience in the development of electrical machines, preferably for railway or off-highway vehicle applications, including permanent magnet motors Deep knowledge of design, engineering, simulation, CAD, PLM, and ERP tools related to electrical machines Demonstrated leadership experience, including line management, people development, portfolio responsibility, and managing large-scale, complex projects Strong stakeholder management skills with the ability to collaborate and influence across all levels of the organization Open-minded, self-motivated and result-oriented, with strong written and verbal communication skills in English More about us Recruiting Manager Cathy Y. Chen, +46 72 461 37 91, will answer your questions about the position. Union representatives – Sveriges Ingenjörer: Håkan Sjöberg, +46 703 96 00 02 ; Unionen: Katja Saari, +46 730 77 05 02; Ledarna: Lenny Larsson, +46 706 32 85 47. All other questions can be directed to Talent Partner Irma Leijon, +46 (72) 4612314. Welcome to apply the latest by August 3rd. As it is currently vacation season, we kindly ask for your understanding that our response time may be slightly longer than usual, but we will get back to you as soon as we can. För att bygga en renare och smartare framtid krävs alla sorters människor: de nyfikna, de modiga och de kreativa. Därför välkomnar vi människor med alla bakgrunder och erfarenheter. Är du redo att göra skillnad? Ansök idag eller besök https://www.abb.com för att lära dig mer om hur våra lösningar påverkar hela världen.

Are you passionate about creating business value while leveraging deep expertise in materials and processes? Do you want to play a key role in the green transition by shaping innovative industrial heating solutions? Then this is your opportunity to lead and develop our global R&D function for Industrial Heating. Kanthal, part of the Alleima Group, is a world-leading brand in industrial heating technology and resistance materials. We develop innovative solutions in close collaboration with our customers, with a strong commitment to reducing environmental impact. With skilled people and pioneering technology, we support some of the world’s most advanced and exciting industrial projects. Your Role In this role, you will lead the global R&D organization for Electrical Industrial Heating, including the Division’s Project Management Office. You will shape our future innovation agenda, ensuring strong collaboration across functions and translating customer needs into profitable, sustainable solutions. Key responsibilities include: Lead and develop the global R&D organization, building a high-performing and collaborative culture Translate customer needs into commercially viable applications, materials and solutions Drive and execute the R&D strategy aligned with business unit priorities Collaborate closely with Business Units and external partners to develop technology platforms and new products Strengthen methodologies and ways of working to increase efficiency, speed and innovation Build strong partnerships with suppliers, research institutes and key stakeholders You will be an active member of both Business Unit Heating Systems and Business Unit Heating Materials management teams. The role reports to the President of BU Heating Systems, with a dotted line to the President of BU Heating Materials. International travel is part of the role. About You You are a confident and inspiring leader with a strong track record of driving innovation, strategy, and business growth in a global environment. With a relevant academic background, you have built solid experience from senior roles within R&D, product management, product development, or similar areas. You combine technical depth with commercial understanding and know how to translate strategy into tangible results that create real customer value. Leading people comes naturally to you, and you have a proven ability to build high-performing teams while successfully driving change and transformation. As a person, you bring energy, curiosity, and a collaborative mindset. You are structured and solution-oriented, yet agile in your approach and able to navigate complexity with confidence. You build trust through clear communication and strong relationships, and you have a natural ability to engage and inspire people across functions and cultures. With a global perspective, you thrive in an international setting and are motivated by contributing to a more sustainable future through innovation. You are fluent in English. What you can expect from us · A strategic leadership role with significant global impact · The opportunity to drive innovation and contribute to the green transition · A collaborative and inclusive culture where your leadership makes a difference · Strong development opportunities within the Alleima Group, along with competitive benefits Other: We do not wish to be contacted by recruitment agencies or other sales and consulting companies regarding this position. In connection with employment, alcohol and drug tests are carried out according to our procedures for a safe working environment and a background check might be conducted. If you wish to attach a cover letter to your application, please make sure to attach the file when uploading your resume. For questions or information regarding the position, you are welcome to contact: Simon Lile, President BU Heating Systems, +44 7525 596869 Linda Johansson, President BU Heating Materials, +46 70 218 13 75 For questions regarding the recruitment process, please contact: Åsa Alm, Recruitment specialist, +46 70 313 90 38 Union Representative: Petter Lindblom, Swedish Association of Academics, 070 616 04 26 Riccard Söjbjerg, Unionen, 070 611 28 71 Johan Baringson, Ledarna, 070 616 53 96 Apply by 2026-08-09, please leave a message during the vacation time and we will call you back. Kanthal is an Alleima company and a world-leading brand for products and services in industrial heating technology and resistance material. Backed by our skilled people and pioneering technology, every innovative solution is a creative partnership with our customers. With a strong commitment to reducing climate impact, we support some of the world’s largest and most exciting projects. Find out more at www.kanthal.com and www.alleima.com

Jag söker dig som är lyhörd, flexibel och ansvarstagande. Du är en person som tar ditt arbete på allvar och du är medveten om brukarens beroende av stöd i olika situationer. Du behöver vara punktlig och hålla tider. Det är min tid du hanterar. Det behöver finnas en självklar känsla för att detta är mitt privatliv och du behöver ha en stor respekt för detta. Du som söker ska vara gymkunnig (det innebär bl.a att du kan följa med mig till gymmet och förstå vad jag pratar om och har erfarenhet av vad redskap heter till exempel) och du behöver vara stark och kunna stötta i gymmet. Simkunnighet är ett krav!. Hund finns i hemmet så du kan inte var allergisk eller hundrädd. Den kompetens du behöver för jobbet är: -Behärska god svenska i tal och skrift. -Vara fysiskt aktiv/stark. -Simkunnig. -Vana av att framföra rullstol. -Erfarenhet av arbete med synskadade. -Minst ett års erfarenhet av yrkt personlig assistent. Jag ser fram mot din ansökan! OBS! Skicka ansökan via e-post: a_led_aida@hotmail.com

"We are looking for a Laboratory Engineer who thrives on understanding why materials behave the way they do. Someone who enjoys getting hands-on in the lab, developing methods, solving technical challenges and turning microstructural observations into insights that support innovation, production and customer success. This is an opportunity to take ownership of a laboratory that is central to our future development and help unlock its full potential." – Tania Loaiza, R&D Manager Help shape the future of specialty steel At Ovako, we combine more than 300 years of industrial expertise with modern technology and a strong commitment to sustainability. As a leading European producer of specialty steel, we continuously develop products and processes that meet future demands for performance, quality and reduced climate impact. Research and development play a vital role in this journey. Through advanced materials characterisation, testing and metallurgical expertise, we generate knowledge that strengthens both our products and manufacturing processes. We are now looking for a Laboratory Engineer who wants to build deep expertise in materials characterisation while helping shape the future of specialty steel. This is a role for someone who enjoys combining practical laboratory work with advanced technical analysis and is motivated by creating long-term value through scientific knowledge and continuous improvement. The role As a Laboratory Engineer within Ovako's R&D organisation, you will take dedicated ownership of our materials laboratory and play a key role in ensuring it delivers maximum value to the business. Acting as the technical focal point for materials characterisation, testing and failure analysis, you will collaborate closely with researchers, production teams, customers and external partners. The role combines hands-on laboratory work with technical analysis, method development and continuous improvement, giving you considerable freedom to plan, prioritise and drive your own work. Your work will contribute directly to R&D projects, production-related investigations and customer assignments, generating knowledge that supports both today's operations and tomorrow's product development. Responsibilities Operating, maintaining and calibrating laboratory equipment to ensure high reliability and readiness Performing materials characterisation and testing of steels and other metallic materials Preparing metallographic samples, conducting optical microscopy and performing image analysis Working with scanning electron microscopy (SEM) and hardness testing Conducting failure analysis and root cause investigations Developing, validating and documenting test methods to ensure reproducibility and traceability Explaining technical findings clearly to internal stakeholders and international customers Support university collaboration, including supervision of students Contributing to a deeper understanding of structure–property relationships in steels Identifying opportunities to further develop laboratory methods, analytical capabilities and ways of working  Your profile You're a proactive and hands-on engineer with genuine technical depth and a passion for materials engineering. You enjoy combining careful experimentation with practical problem-solving and take pride in producing reliable results that others can build upon. You work independently and drive activities forward with confidence.  To succeed in this role, we believe you have: A Bachelor's degree or higher in Materials Engineering, Metallurgy or a related field At least three years of practical laboratory experience Experience in developing and validating test methods Experience in equipment maintenance, calibration and laboratory operation Strong metallography knowledge, including sectioning, mounting, polishing, etching and quantitative analysis such as grain size and retained austenite measurements Hands-on experience with optical microscopy, image analysis and scanning electron microscopy (SEM) Strong communication skills and the ability to explain technical results to different audiences Good command of English, both written and spoken  Meritorious Fatigue testing Non metallic inclusion investigation Heat-treatment fundamentals Alloy development and new steel grades Understanding how composition and processing influence material properties Who are you? We believe you are the kind of engineer who naturally takes ownership and enjoys building deep technical expertise over time. You are curious and analytical, motivated by understanding how materials, processes and microstructures interact to influence performance. While you enjoy working hands-on in the laboratory, you also appreciate the bigger picture and understand how robust methods, reliable data and technical knowledge create long-term value for the business. We believe you are: Proactive and self-driven Analytical, structured and quality-conscious Hands-on with a practical approach to problem-solving Communicative, collaborative and able to build strong relationships Motivated by continuous improvement and long-term technical development  Location: Hofors, Sweden, on site. Ovako offers a relocation package.  Application and information This recruitment is managed by AxÖ Consulting. For questions regarding the position or the recruitment process, please contact: Fiddelie Nyvall: fiddelie.nyvall@axoconsulting.se  Linda Axäng: linda.axang@axoconsulting.se Please note: As this recruitment takes place during the summer holiday period, response times may be longer than usual. We appreciate your patience and will get back to all candidates as soon as possible. Background checks may be conducted as part of the recruitment process.

Gnothis AB is seeking for a hands-on engineer who enjoys building experimental systems in a laboratory environment. The role combines microfluidics integration, instrument prototyping, and Python-based automation. This is a permanent position based at our HQ, located at the campus of Stockholm University (Stockholm, Sweden). Gnothis, founded in 2015 and supported by highly innovative industrial professionals and technology developers, is on a mission to develop a new frontier for single molecule DNA sequencing; to break the mold on how sequencing is used as a clinical tool for the diagnosis of complex diseases. Gnothis technology integrates a wide range of cutting-edge sciences ranging from nanotechnology, photophysics, optics, surface chemistry, biochemistry and computational science. Since we have taken significant steps forward and now need to solve the remaining crucial challenges before commercialization; for the right person this is a unique opportunity to become a valuable member, to use your “think-outside-the box” mentality with aim to develop a new world-class technology platform! Our instrumentation, software and analysis team currently consists of four engineers and we are now expanding the team as we scale development of the system. The work is primarily on-site and very practical, involving both hardware integration and control software development. The position is part of a multidisciplinary team developing a prototype DNA sequencing instrument combining microscopy, microfluidics, nanofabrication and advanced data analysis. Initial Project The first major task will be to design and integrate a microfluidics subsystem into our existing microscope prototype – to plan, test, order and add already commercially available components to a final prototype. This includes selecting and integrating a commercial microfluidics system (e.g. Elveflow or similar), designing a custom sample chip holder and fluid interface, integrating control into an existing Python control software, and establishing practical operation and cleaning procedures. The work is supported by a biochemistry team, but we are seeking for the right candidate who can make confident engineering decisions based on previous hands-on experiences connected to eg. microfluidics and laboratory automation. Responsibilities Mechanically integrate new devices into a prototype life-science instrument. The initial focus is on liquid sample handling, such as flow and temperature control. Develop Python control and automation software, starting from existing vendor SDKs. Design simple mechanical parts (CAD / 3D printing) Hands-on prototyping and debugging in the lab Method development for instrument performance evaluation and self-calibration. Over time the role will involve increasing focus on automation and device control software. Candidate Profile For you to enjoy performing expected activities, and being a valuable member in an ambitious and innovative team; we think you are an engineer with a strong creative mindset and with strong previous experience building/developing scientific or laboratory instrumentation. This role suits someone who enjoys experimental prototyping in a small startup environment. The candidate should be comfortable collaborating in a multidisciplinary research environment consisting of engineering, software, biochemistry and nanofabrication experts. Relevant backgrounds and skills include: Master of Science and/or Ph.D. educational background – ideally combined with a relevant Life Science focus. Practical experience with microfluidics systems Python programming for hardware control Comfortable with hands-on lab engineering (CAD, electronics, prototyping) Microscopy / Optics / Imaging Lab automation / Liquid handling Mechatronics / Robotics A recent Ph.D. with strong hands-on instrument development experience could also be a good fit for this position. Gnothis offer a creative environment focused on technology and product development, a competitive compensation package and plenty of room for self-development as the company expands. This is a permanent position (not consultant assignment). If above sounds like an exciting opportunity and you would like to hear more, do not hesitate and submit your application and we will get back to you! Gnothis AB on LinkedIn: https://www.linkedin.com/company/gnothis/posts/?feedView=all For inquires please email us at: markus.dahl@valleyrecruitment.se

Vill du följa barns utveckling genom de första viktiga skolåren? Umeå Waldorfskola söker en engagerad klasslärare inom spannet för årskurs F–6 som vill vara med och skapa en skola där kunskap, kreativitet och mänsklig utveckling går hand i hand. Hos oss möter du en levande Waldorfpedagogik där eleverna får växa och lära genom upplevelser, experiment och berättande. Vi tror på långsiktiga relationer, sammanhang och undervisning som väcker nyfikenhet och kreativitet. Om tjänsten Som klasslärare ansvarar du för en klass och följer elevernas kunskapsmässiga, sociala och personliga utveckling. Du planerar, genomför och utvecklar undervisningen i nära samarbete med kollegor, elevhälsa och vårdnadshavare. Du blir en viktig del av skolans pedagogiska gemenskap och bidrar till att utveckla vår verksamhet i en tid då skolan växer och utvecklas. Vi söker dig som är legitimerad lärare för årskurs F–6 (alternativt årskurs 4-6) har erfarenhet av eller intresse för Waldorfpedagogik har ett genuint intresse för alla barns utveckling och lärande värdesätter långvariga relationer är kreativ, initiativrik och ansvarstagande är intresserad av vidareutbildning för undervisning på både låg- och mellanstadiet (om inte den kompetensen redan finns) Waldorflärarutbildning är meriterande men inget krav. Vi välkomnar även dig som är nyfiken på Waldorfpedagogik och vill utvecklas tillsammans med oss. Vi rekommenderar dig att gå in på vår hemsida www.waldorfumea.se för att söka information om Waldorfpedagogik. Vi erbjuder legitimerade och erfarna kollegor engagerade och kompetenta kollegor en vacker och naturnära skolmiljö möjlighet till pedagogisk utveckling och fortbildning en arbetsplats där kultur, skapande och hållbarhet är en viktig del av vardagen en skola där engagemang, relationer och gemenskap står i centrum en icke vinstdrivande verksamhet med elevernas bästa i fokus Om Umeå Waldorfskola Umeå Waldorfskola är en icke vinstdrivande fristående F–9 skola. Vi är Umeås äldsta friskola och Sveriges nordligaste Waldorfskola. Vi erbjuder Waldorfpedagogik för ca 230 elever med en klass per årskurs. Välkommen med din ansökan bestående av CV, kopior på legitimation och intyg samt personligt brev. Har du frågor om tjänsten är du varmt välkommen att kontakta rektor Linda Zachrisson och/eller biträdande rektor Emilia Hennix Isling. Urval inför intervju sker löpande, vänta inte med att ansöka. Vi ser fram emot att höra från dig!

At ABB, we help industries run leaner and cleaner—and every person here makes that happen. You’ll be empowered to lead, supported to grow, and proud of the impact we create together. Join us and help run what runs the world. This position reports to: R&D Team Lead__ Your Role and Responsibilities Are you ready to take the next step in your R&D career and help drive innovation within one of the world’s leading technology companies? As R&D Scientist, you will become a part of the Power Electronics & Applications team at ABB Corporate Research in Västerås, Sweden. ABB's Corporate Research serves as the innovation engine, ensuring our technological leadership both now and in the future. We work closely with other research centers, business areas (Motion, Automation, Electrification), and academic and industrial partners. Within our creative and highly skilled team, we design, build, and validate novel concepts and prototypes for both physical and digital systems. Our work covers the entire chain, including electric energy sources, grid-connected converters, electric motors and drives. As part of this role, you’ll report to the R&D Team Manager, actively collaborating on and driving the execution of exciting R&D projects. To thrive in this position, a positive and structured mindset, a solid technical background, and genuine enthusiasm for leveraging our highly advanced simulation and experimental facilities are essential. This regular employment opportunity serves as an excellent starting point for an engaging career within ABB. Key Responsibilities Lead and drive R&D initiatives from idea to validated concept, including defining scope, collaborating with key stakeholders, and sharing results. Develop and validate innovative solutions in applied power electronics, through high-fidelity modeling of power electronics and control strategies, as well as hands-on design and construction of experimental test setups in our laboratories. Explore and challenge conventional approaches, scouting new technologies and concepts while contributing to the development of digital solutions for ABB’s future portfolio. Our Team Dynamics Our teams support each other, collaborate, and never stop learning. Everyone brings something unique, and together we push ideas forward to solve real problems. Being part of our team means your work matters - because the progress we make here creates real impact out there. Qualifications for the role PhD in power electronics, electrical engineering, applied mathematics, or an MSc combined with substantial relevant industry or research experience, with a strong theoretical foundation and hands-on expertise in power electronics topologies, control, and applications (e.g., grid-connected converters, energy storage, Electric motor drives). Proficiency in the design, modeling, simulation, and optimization of power converters and drives, including experience in condition monitoring and diagnostics of the systems. Strong experimental and analytical skills, with proven ability to design and implement test setups, plan and conduct experiments, analyze results, and clearly document findings. Knowledge of data-driven methods, machine learning, and advanced modeling techniques is considered a strong plus, especially for applications in predictive modeling, condition monitoring, and the optimization of systems. A collaborative and results-driven mindset, enabling effective cooperation across R&D teams and business stakeholders, combined with the initiative and leadership needed to deliver high-quality results on time and within budget. What’s in it for you? We empower you to take initiative, challenge ideas, and lead with confidence. You’ll grow through meaningful work, continuous learning, and support that’s tailored to your goals. Every idea you share and every action you take contributes to something bigger. ABB provides competitive benefits, ask us! More about us  Recruiting Manager Omer Ikram ul Haq, +46 (73) 066 06 22, will answer your questions about the position. Union representatives – Sveriges Ingenjörer: Carl-Fredrik Lindberg, +46 70 691 10 80; Unionen: Katja Saari, +46 730 77 05 02; Ledarna: Lenny Larsson, +46 706 32 85 47. All other questions can be directed to Talent Partner Robert Noren, +46 72 461 20 95. We look forward to reading your application in PDF format. Last day to apply is August 10. Please note that the interview process is ongoing, apply now to secure your spot in the recruitment process! Please note that to be eligible for employment at ABB Sweden, you will need to pass our pre-employment screening steps. This includes a reference check, a drug test, and could also include an extended background check. Building a cleaner, smarter future takes all kinds of minds: the curious, the courageous, and the creative. That's why we welcome people from all backgrounds and experiences. Ready to make an impact? Apply today or visit https://www.abb.com to learn more about the impact of our solutions across the globe.

ALTEN söker en nyfiken och noggrann R&D Analytical Chemist som vill vara med och forma framtidens Life Science‑lösningar. Vi söker nu en driven och analytisk R&D-ingenjör med specialistkompetens inom kromatografi och metodutveckling till ett längre uppdrag hos ett av Sveriges ledande Life Science-företag i Uppsala. I denna roll kommer du att arbeta i en forskningsnära och laboratorieinriktad miljö, där du bidrar till utvecklingen av nya produkter och förbättring av befintliga processer. Du blir en del av ett kompetent analytiskt team som arbetar med avancerade analysmetoder för att stödja både produktutveckling och produktion. VAD ERBJUDER VI? Som konsult på ALTEN får du möjlighet att arbeta med utmanande och spännande projekt hos några av våra viktigaste kunder, med: Tekniska utmaningar och utvecklingsmöjligheter. En inspirerande gemenskap och möjlighet att bidra till en hållbar och automatiserad framtid. Stöttande och coachande ledarskap. Möjlighet att arbeta inom olika branscher där våra kunder verkar. En personlig utbildningsbudget för interna eller externa kurser. ROLLEN Som R&D Analytical Chemist kommer du att: Utföra analyser med hjälp av kromatografi (HPLC/LC/GC) och andra analytiska tekniker. Utveckla och optimera nya analysmetoder inom ramen för olika projekt. Validera metoder enligt etablerade riktlinjer och regulatoriska krav. Genomföra uppdragsanalyser åt produktions- och kvalitetsavdelningar. Samarbeta tvärfunktionellt med interna team för felsökning, metodutveckling och processförbättringar. Dokumentera och rapportera resultaten på ett strukturerat och vetenskapligt sätt. Rollen är laboratorieinriktad och innebär både projektarbete och stöd till produktions- och kvalitetsfunktioner. Du kommer att arbeta nära andra specialister och få möjlighet att påverka både tekniska och strategiska beslut. KRAV Vi söker dig som har: PhD eller MSc inom analytisk kemi, biokemi, kemiteknik eller liknande relevant område. Erfarenhet av kvantitativ kromatografi (HPLC/LC/GC) och masspektrometri. Erfarenhet av metodutveckling och validering inom analytisk kemi. Mycket goda kunskaper i svenska och engelska. Erfarenhet inom Life Science MERITERANDE Erfarenhet av forskning och projektarbete i industrimiljö. Kunskap om statistisk analys och erfarenhet av avancerade analytiska verktyg. Erfarenhet av GMP (Good Manufacturing Practice) och regulatoriska krav inom Life Science. PERSONLIGA EGENSKAPER Analytisk och lösningsorienterad. Samarbetsinriktad. Initiativrik och strukturerad. TIDSRAM Start: Slutet av augusti 2026 Placering: Uppsala Omfattning: Heltid, On‑site Varför ALTEN? På ALTEN blir du en del av ett högt kvalificerat team som arbetar med några av de mest spännande projekten inom teknik och Life Science. Vi erbjuder en kultur där du kan växa, utvecklas och göra verklig skillnad genom innovativa lösningar och tekniska framsteg. Om ALTEN ALTEN är ett av Europas största teknik- och IT‑konsultföretag med över 60 000 medarbetare i mer än 30 länder. I Sverige är vi cirka 1 300 konsulter på 11 orter, från Malmö till Skellefteå, och stöttar världsledande företag inom Automotive, Telecom, Industry, Energy, Aerospace & Defense och Life Science. För sjätte året i rad har ALTEN utsetts till ett av Sveriges mest attraktiva arbetsgivare av Karriärföretagen. Välkommen att läsa mer om oss på alten.se. Vi ser fram emot din ansökan.

R&D Project Manager – Service Division A Snapshot of Your Day Step into the role of R&D Project Manager within our Service organization and lead development projects for our existing gas turbine fleet, driving technical advancements that shape the future of sustainable energy. No two days are alike, you’ll thrive in a dynamic, creative environment where your leadership and problem-solving skills deliver high-impact solutions. You’ll guide cross-functional teams, foster collaboration, and play a key part in cutting-edge product development. This is your opportunity to make a real difference while growing professionally in a global organization. How You’ll Make an Impact • Take full ownership of R&D projects, guiding them from initiation to delivery and follow-up • Set up projects using best practices and agile methodologies • Develop comprehensive plans and break them down into actionable deliverables • Lead cross-functional teams, strengthen team spirit, and drive innovation in a multicultural environment • Focus on scheduling, tracking, quality, and cost control, coordinating with STECO and resource owners to ensure successful outcomes • Facilitate project meetings and support your team in solving technical challenges creatively • Collaborate with partners across the globe, navigating different cultures, working styles, and languages • Project teams typically range from 3 to 10 members What You Bring • Several years of experience in project management • Proven track record of leading projects in an R&D environment • Experience with gas turbines is a plus, especially knowledge gained through commissioning or design work • Experience managing projects related to control systems, cores, or packages is highly valued; experience with mechanical auxiliary systems or power generation is also beneficial • Fluent in both Swedish and English, written and spoken; additional language skills are a plus • Open-minded and professional approach to global interactions in an international environment • Communicative, structured, proactive, and goal-oriented About the Team You’ll join a passionate and diverse team dedicated to advancing the performance and reliability of our gas turbine fleet. The team works collaboratively across disciplines and cultures, combining technical expertise with creative problem-solving to deliver innovative solutions. You’ll be supported by experienced colleagues and have the opportunity to contribute to projects that drive the energy transition. Together, you’ll foster a culture of continuous improvement, learning, and mutual respect. Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.

Veritaz is a leading IT staffing solutions provider in Sweden, committed to advancing individual careers and aiding employers in ensuring the perfect talent fit. With a proven track record of successful partnerships with top companies, we have rapidly grown our presence in the USA, Europe, and Sweden as a dependable and trusted resource within the IT industry. Assignment Description We are looking for an experienced R&D Project Manager What You Will Work On Lead engineering and R&D projects from planning through successful delivery Manage project scope, schedule, budget, and technical objectives Develop comprehensive project plans including: Project goals Strategy Resource planning Scheduling Risk identification Contingency planning Monitor project progress and track milestones and deliverables Prepare and communicate regular project status reports Manage project changes and change control activities Identify, assess, and mitigate project risks Escalate project issues and risks when appropriate Lead, coach, and motivate cross-functional project teams Coordinate activities with program managers and related projects Ensure project deliverables achieve the intended business objectives Support continuous improvement and agile ways of working within the organization What You Bring Minimum 3 years of experience as a Project Manager or in a similar leadership role Proven experience managing engineering or product development projects Strong experience with: Project Planning Budget Management Schedule Management Resource Planning Risk Management Change Management Stakeholder Management Experience leading cross-functional engineering teams Strong leadership, communication, and coordination skills Ability to manage multiple priorities in technical environments Experience working with both predictive and Agile project management methodologies Excellent communication skills in both Swedish and English Ability to work primarily onsite in Finspång

Är du vår nästa servicetekniker i Malmö? Vill du ta nästa steg i din karriär och bli en del av ett företag som brinner för hållbarhet, teknik och innovation? Nu söker vi en engagerad och lösningsorienterad servicetekniker till vårt team i Malmö! Om A.R.C A.R.C Fastighetspartner är ett växande företag inom fastighetsbranschen, grundat 2020 i de småländska skogarna av fem eldsjälar. Sedan dess har vi vuxit till över 115 medarbetare på 15 kontor runt om i Sverige. Vi arbetar med hela fastigheten – från drift och service till energioptimering och teknisk förvaltning – alltid med målet att skapa hållbarhet och lönsamhet för våra kunder. Hos oss präglas vardagen av glädje, ansvar och samarbete, och vi tror på att utveckling börjar med engagemang. Om rollen Som servicetekniker hos A.R.C i Malmö får du ett självständigt och varierande arbete där du ansvarar för service, underhåll och felsökning av kyl- och ventilationsanläggningar hos våra kunder. Du arbetar med både planerade serviceuppdrag och akuta insatser och bidrar till att skapa energieffektiva, driftsäkra och hållbara fastigheter. Dina huvudsakliga arbetsuppgifter: Service, underhåll och felsökning av kyl- och/eller ventilationsanläggningar Genomföra förebyggande underhåll och funktionskontroller Identifiera förbättringsåtgärder som ökar driftssäkerhet och energieffektivitet Dokumentera utfört arbete och rapportera avvikelser Ha löpande kontakt med kunder, leverantörer och kollegor Bidra till att utveckla våra arbetssätt och leverera service i toppklass Vem är du? Vi söker dig som har erfarenhet av service och underhåll inom kyla, ventilation eller båda områdena. Du är en lösningsorienterad tekniker som trivs med att ta ansvar, arbeta självständigt och bygga långsiktiga kundrelationer. Vi tror att du har: Erfarenhet av arbete med kyl- och/eller ventilationsanläggningar Teknisk utbildning inom kyla, ventilation, VVS eller motsvarande erfarenhet God förmåga att felsöka och lösa tekniska problem Goda kunskaper i svenska, både i tal och skrift Grundläggande kunskaper i engelska B-körkort Det är meriterande om du har: Certifikat inom kyla (F-gas) Erfarenhet av styr- och reglerteknik eller fastighetsautomation OVK-behörighet eller erfarenhet av ventilationsinjustering Du delar våra värderingar – seriös, pålitlig, nytänkande och engagerad – och vill vara med och skapa framtidens fastighetstjänster. Vi erbjuder dig En dynamisk arbetsmiljö med engagerade kollegor Stora möjligheter till personlig utveckling och kompetensutveckling Ett självständigt och varierande arbete med frihet under ansvar En inkluderande arbetsplats där gemenskap och trivsel står i fokus Hos A.R.C är du inte bara en servicetekniker – du är en viktig del av ett företag som vill göra skillnad, både för kunder och kollegor. Vill du vara med på vår resa mot en smartare och mer hållbar fastighetsbransch? Skicka in din ansökan redan idag – vi ser fram emot att höra från dig!

Tylö är en del av Sauna360 som i sin tur är en del av Watkins Wellness, en global ledare inom wellnessprodukter och spabad. Inom Sauna360 samlas flera av världens starkaste bastu-varumärken, Tylö, Helo, Kastor, Finnleo och Amerec. Våra produkter används i både privata och kommersiella bastuprojekt över hela världen. Med en stark passion för bastu, hälsa och välbefinnande kombinerar vi svenska hantverkstraditioner, teknisk innovation och global räckvidd. Vårt mål är att skapa bastuupplevelser i världsklass genom lösningar inom bastu, ånga och infraröd värme, produkter som bidrar till återhämtning, balans och ett hälsosamt liv.www.tylo.se Tylö söker en Design Engineer Electrical till R&D Vi befinner oss i en spännande tillväxtfas och behöver förstärka vår R&D-avdelning med en driven och kompetent Design Engineer som vill vara en del av vår fortsatta resa. Som Design Engineer hos oss blir du en del av vårt R&D-team och ansvarar för den elektriska konstruktionen av våra elaggregat och ånggeneratorer. På sikt kan du utvecklas inom projekledning. I rollen arbetar du med hela produktutvecklingsprocessen från idé och koncept till serieproduktion. Du kommer att utveckla designkoncept, ta fram 3D-modeller och ritningar, genomföra tester samt dokumentera produkterna. Arbetet sker i nära samarbete med övriga medarbetare inom R&D samt med våra team inom försäljning, marknad och produktion. Du kommer även att arbeta nära vår Chief Technology Officer (CTO) som du även rapporterar till. Vi söker dig som arbetar strukturerat och har en god analytisk förmåga. För att trivas och lyckas i rollen är du drivande, självgående och van att ta ansvar för dina arbetsuppgifter. Du har god kommunikativ förmåga och kan på ett effektivt sätt driva projekt och processer framåt. Vi ser att du har en högskole- eller civilingenjörsexamen inom elektroteknik eller motsvarande. Erfarenhet av projektarbete är meriterande. Du har erfarenhet av CAD-konstruktion, gärna i SolidWorks, och har arbetat som ingenjör i minst tre till fem år. Du kommunicerar obehindrat på både svenska och engelska, i såväl tal som skrift. Erfarenhet av Adobe InDesign eller affärssystemet Jeeves ERP är meriterande. Känner du igen dig i beskrivningen ovan och vill fortsätta utvecklas i ett företag med stark framtidstro och positiv utveckling? Då kan du vara den person vi söker! I den här rekryteringen samarbetar Sauna360 med Nilson & Mossberger. För frågor om tjänsten kontakta Carin Mossberger 0701-460 390 eller Andreas Nilsson 0701-460 391. Skicka in din ansökan snarast då urval sker löpande. Välkommen in med din ansökan!

Company description: At NKT in Karlskrona, we develop and manufacture high voltage power cables that enable the transition to renewable energy. Here, you will be part of an international engineering centre with advanced high voltage test halls, modern cable production and the cable laying vessel NKT Victoria. As Connectors, we collaborate to develop innovative technology that connects a greener and more sustainable world. NKT is headquartered in Denmark and operates in more than 30 countries.NKT - We connect a greener world. www.NKT.com. Job description:Are you ready to take the next step in your career and play a key role in advanced R&D projects?   At NKT’s HV Technology Department, we are looking for a skilled and forward-thinking R&D Electrical Engineer to lead technical innovation in High Voltage and Ultra High Voltage applications.   About the role You will manage technical and project initiatives, combining deep theoretical knowledge with practical experimentation. Your knowledge and skills in electromagnetic, thermal, and high-voltage engineering will be essential to understand, model, and predict complex phenomena in HV components and insulation systems. Based at our Technology Center in Västerås, you will work in a highly collaborative environment with access to advanced laboratories and colleagues who are specialists in their fields. NKT is making significant investments in R&D, offering a great chance to contribute to advanced innovation in the energy sector.   Your responsibilities As an R&D Electrical Engineer, you will: Model and simulate electromagnetic and thermal phenomena in insulation systems Develop future designs for High Voltage products and superconductor cable systems Increase understanding of AC and DC electromagnetic phenomena through theory and experiments Build electrical test circuits and perform electro-thermal testing to validate simulations Analyze electrical failures and recommend design or process improvements Contribute to technology and product innovation by identifying and implementing creative solutions Identify and mitigate technical and project risks in R&D and consulting work Provide technical advisory support to internal and external stakeholders Propose and initiate R&D projects aligned with NKT’s long-term technology strategy Build and maintain a global network of technical partners and business units   Who we are looking for You are a motivated and structured problem solver who combines a methodical approach with creativity. You work systematically, take initiative, and are trusted to deliver high-quality results. You also understand the business context and can translate technical insights into customer and organizational value.   Required qualifications: MSc or PhD in Electrical Engineering or High Voltage Engineering/Technology Experience with electromagnetic or multiphysics simulations (e.g. FEM) Proficient in commercial numerical tools such as MATLAB, ANSYS, COMSOL, PSPICE, and LabVIEW Minimum 3 years’ experience in R&D or a similar technical role Proficient communication skills in spoken and written English   Why NKT? At NKT, we value diversity, inclusion, and collaboration. We believe diverse perspectives create sustainable performance and a workplace where people are inspired to do their best.   Application deadline: 9 August 2026 (Selection is ongoing; personality assessments may be part of the process.)   Contact For questions about the position, contact Hiring Manager Claire Pitois at Claire.Pitois@nkt.com For recruitment process inquiries, contact HRBP Anna Lundell at anna.lundell@nkt.com #LI-Hybrid #LI-JM1    Union Representatives: Sveriges Ingenjörer - Zohreh Keshavarz at Zohreh.Keshavarz@nkt.com or Edo Kolic at Edo.Kolic@nkt.com   Due to GDPR regulations, applications cannot be accepted by email. We collect confidential candidate experience feedback to improve our recruitment process. Your responses are for quality development only and do not affect hiring decisions.    Welcome with your application! Profile description:Who we are looking for You are a motivated and structured problem solver who combines a methodical approach with creativity. You work systematically, take initiative, and are trusted to deliver high-quality results. You also understand the business context and can translate technical insights into customer and organizational value.   Required qualifications: MSc or PhD in Electrical Engineering or High Voltage Engineering/Technology Experience with electromagnetic or multiphysics simulations (e.g. FEM) Proficient in commercial numerical tools such as MATLAB, ANSYS, COMSOL, PSPICE, and LabVIEW Minimum 3 years’ experience in R&D or a similar technical role Proficient communication skills in spoken and written English